Skip to content
View in the app

A better way to browse. Learn more.
Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Porlw

Members

  • Joined

  • Last visited

View Profile Find content

  1. Can't change my Deye SmartLoad activation COC from 100%

    Porlw replied to Porlw's topic in Batteries
    That worked! Many thanks, much appreciated.

  2. Can't change my Deye SmartLoad activation COC from 100%

    Porlw posted a topic in Batteries
    I have 2 x 5Kw Deye inverters connected in parallel, with 2 Deye 6.14Kwh batteries and 21 470W panels. SmartLoad works fine, but I can't set SmartLoad to activate if the battery COC is less than 100%. (I can however adjust the cutoff COC from 95% down) In the morning, when the batteries are charging (at 3-4Kw), it typically takes about 2 mins to increase the COC by 1%. However, once the COC reaches 99%, the charge rate drops to below 1Kw and it takes 30mins to go from 99%->100%, when (finally) the SmartLoad activates. I assume the BMS cuts the charge rate as the batteries reach full capacity. SmartLoad runs my pool pump, so I'd like it to start once the battery COC reaches 99%.

Account

Navigation

Search

Search

Configure browser push notifications
Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.