omarb

Hi, Retry flashing with the IAP and the firmware file on here. Post if you need assistance. On my first flash attempt I had a similiar scenario, I just refreshed and it was sorted. However still don't have the li bms working.

Hi All, if anyone has it working with a deye 8kw can you post the pinouts of your can cable? I've no made many iterations of this cable and none works, from a normal straight through, to just the middle pins and middle pins swopped on one end etc... the li bms on the deye doesn't pick up the battery in the list. Lithium mode is set to 00 on the deye. Any help will be appreciated.

Lol... realised I needed the password for the bms tool. Myne was not "green1234" instead it was "AF123456". I changed protocols and tried restoring defaults etc, still no BMS info on the inverter. I did shutdown the battery between settings changes.

Ok, I realised it was the IAP demo software posted a little back. I flashed the battery successfully. Still not talking to the inverter. Can someone post their settings with the deye inverters, also dip switch settings as well please. The clever bms shows that the can protocol is pylontech, I can't change anything as the write button is grayed out.

Hi, can you please share the software you used to flash the firmware? I built the cable and can use topbms to talk to the battery. My problem is I'm not getting any battery info on the inverter. Inverter is 8kva Deye and batt is volta stage 1.