pin32

ok. la versione 1.18 SP6 working.... grazie mille Thank!!

Greetings. after a couple of days of tinkering I found a partial solution, at least as far as the app is concerned. the problem was the wrong "PN" number... using the wifi ?ssid it worked... I don't know why the number on the label was wrong. the problem of the serial remains (which is the one I need to interface the inverter with home automation (openhab). the problem that arises is that the watchpower software does not detect the inverter... by querying with a terminal (at 2400 8n1 ) the inverter replies "NAKss" and this is normal given that the crc has not been inserted, but the test I needed to see if the 232 was operational... I have no idea of the type of protocol used by this inverter if it is the same as that of a VM III that I already have running (commands with the "Q" qpiri, qmod, etc. Does anyone have any idea what I can do to try something? Thank you Joseph

Hi guys. I have an Easun SV IV igrid 5.6kw, I'm testing it but I can't communicate with it either with its app or with watchpower via serial. I wasn't able to use USB because I don't see the virtual port with watchpower. in detail it seems that the connection occurs but then no data is displayed. I can't figure out if it's a fault or I'm doing something wrong. do you have any advice? Thank you