Thembeni

Good day, my synerji 5Kw inverter blew two big capacitor and a transistor. the problem now is I don’t know the sizes as they not visible. any assistance please

Thank you very much guys

Hi guys, When the inverter is running from battery/ solar while utility is out,the elevated voltage between neutral and earth goes about 90v ac.I tried to bond them together on the output of the inverter but when I switch back to utility it trips the main earth leakage. any suggestions on how to overcome this? Thank you

Thanx , I have installed 102Ah batteries , the previous ones where about 12Ah.I have not experienced that and it is about a month now. How do you test the system for Coc e.g Pscc and Loop . I believe the other tests are the same as normal coc for utility?

Hi Guys I have 5kVA synerji inverter now an then I get the following fault code 03 Battery voltage is too high 08 Inverter bus voltage is too high 56 ?? please assist

Please send your cell numbers to [email protected] so I can give you a call

In Welkom

Hi, I have counted the cells are 60 ,I have 3 strings of 3 panels connected in series and paralled in the fuse box

DIY

Thank you, I tried to maximise the load to 1kW and i got battery alarm and the sun was shining directly to all 9 panels

Thanx for the information, I am now stressing because it not working according to the expectation

sorry 0.13kW , I was expecting 275x9 = 2475 W.I am new in this field. Thank you

Please assist me , I just installed the synerji inverter with 9x275W panels.My inverter shows (on the display ) PV 106V 0.13W. Does this means my PV produces 130W?