waaalid

We in Syria are still using adsl. When the panels work immediately, snr, I have 20 and it becomes 6, and the internet disconnects. I extended a special cable to the router far from the power source, and nothing benefited. I also changed the router. For your information, the panels are directly above the roof of my room. 4 panels. In the evening, the internet starts working properly, and snr 20

@Coulomb @melac @Mika

What is the solution to the inverter interference on the Internet? From 7 AM until 6 PM, there is strong interference on the Internet. The SNR becomes 20. At 7 AM, the SNR becomes 6 and the Internet is very slow. Knowing that I changed the filter and moved the router away from the Inverter, it did not help. What is the solution?

@كولومبI want the Display 39.06 program. When I download the 39.16 program or any other program, the device does not recognize the BMS CABLE and issues an error 61. What's wrong, please?

@All

@Coulomb

Please can you help me?

Hello everyone I have a ags 4k vm iv twin inverter 5 months ago I updated the firmware to 60.89 and the home screen software to 22.20 Three days ago, I bought a lithium battery. When I connected the BMS cable, option number 5 changed to lip or lic. After 2 minutes error 61 appears I tried all u2 versions 39.16 39.25 22.22 I checked the cable with the seller I want the basic version available on the inverter, the basic version when I purchased the inverter u1 60.04 u2 39.06 I searched online for basic firmware u1 60.04 u2 39.06 I did not find it. Please, I want the show program 39.06

Please latest software vm-iv twin 4k The device opens solar panels from 60 volts

Hello all Please software 70.70 device vm-iv 4k

This version is on it I hope the latest version is compatible with it

Please find out if this inverter is Voltronic Please latest software version And its compatible software

The screen update is complete and I updated it to version 39.16. As for the processor firmware update, it is not complete. It reaches 5, 10, or 15 percent and gives an error.

The screen update is complete and I updated it to version 39.16 as for the processor firmware update

I tried all versions on the forum and the same result. When it reaches 6%, 10%, 15, or 30%, it gives me a reading or sending error.

😭

remote panel cpu version 22.21

vm iv twin 4k The old version was 60.06, which opens panels from 60 v I tried to update it to version 70, which is on the forum, and it started giving error 32. I tried to download all the versions on the forum when it reaches 5%. Sometimes it reaches 12% or 40%, then it gives me an error in sending data to the inverter. Is it possible to have a version that works on it without problems? When running, the screen components turn on, a counter goes from 8 to zero, then an error is 32. Please help.

Please find the appropriate software for this device I tried 60.6 60.89 Software is not accepted

i need softPlease I want software for this inverter I want the voltage to open the panels at 30V or 60V