nar60

Hi @MartinViljoen, I have found my issue!! If you check in the logs I send. I did not follow the instructions correct. Sending to http://http://192.168.0.87:8123 So it never manage to send the information to HA.

@MartinViljoen, in the logs I spotted: ------------------------------------------------------------------------------ Reading settings entity -> solarsynk_<inverterSN>_inverter_settings ------------------------------------------------------------------------------ /run.sh: line 560: [: ==: unary operator expected What is the issue with the run.sh here?

@MartinViljoen, I am problaly doing something wrong or my HA is not setup correct. See below the Entities under the template does not seem to be responsive. I cannot see any data but If I pull the logs from the add-on it has all the correct data with the current date and time so it was just pulled. ------------------------------------------------------------------------------ -- SolarSynk - Log ------------------------------------------------------------------------------ Script execution date & time: 11/02/2025 11:17:50 Verbose logging is set to: true HTTP Connect type: http Getting bearer token from solar service provider's API. Valid token retrieved. Bearer Token length: 646 Sunsynk Server API Token: Hidden for security reasons Refresh rate set to: 300 seconds. Note: Setting the refresh rate of this addon to be lower than the update rate of the SunSynk server will not increase the actual update rate. Fetching data for serial: <> Cleaning up old data. Please wait while curl is fetching input, grid, load, battery & output data... ------------------------------------------------------------------------------ Inverter Information Brand: Deye Status: Normal Max Watts: 8000 Plant ID: <> Plant Name: DirkjLouw Inverter S/N: <> ------------------------------------------------------------------------------ Data fetched for serial <>. Enable verbose logging to see more information. If ALL values are NULL then something went wrong. battery_capacity 420.0 battery_chargevolt 53.8 battery_current -21.22 battery_dischargevolt 0.0 battery_power -1147 battery_soc 99.0 battery_temperature 30.7 battery_type 1 battery_voltage 54.1 day_battery_charge 9.4 day_battery_discharge 0.5 battery1_voltage 0.0 battery1_current 0.0 battery1_power 0.0 battery1_soc 0.0 battery1_temperature 0.0 battery1_status 1 battery2_voltage 0 battery2_current 0 battery_dischargevolt2 0 battery2_power 0 battery2_soc 0 battery2_temperature 0 battery2_status 0 day_grid_export 0.0 day_grid_import 6.3 day_load_energy 8.60 day_pv_energy 13.70 grid_connected_status 0 grid_frequency 50.0 grid_power 0 grid_voltage 238.4 grid_current 1.5 grid_power1 0 grid_voltage1 0 grid_current1 0 grid_power2 0 grid_voltage2 0 grid_current2 0 inverter_frequency 50.0 inverter_power 1063 inverter_current 4.5 inverter_voltage 239.4 inverter_power1 0 inverter_voltage1 0 inverter_current1 0 inverter_power2 0 inverter_voltage2 0 inverter_current2 0 load_frequency 50.0 load_current 0.0 load_power 1105 load_voltage 239.0 load_current1 0.0 load_power1 1105 load_voltage1 239.0 load_current2 0.0 load_power2 1105 load_voltage2 239.0 load_totalpower 1105 load_upsPowerL1 0.0 load_upsPowerL2 0.0 load_upsPowerL3 0.0 load_upsPowerTotal 1105.0 pv1_current 4.6 pv1_power 1165.0 pv1_voltage 253.0 pv2_current 4.6 pv2_power 1163.0 pv2_voltage 253.4 pv3_current 0 pv3_power 0 pv3_voltage 0 pv4_current 0 pv4_power 0 pv4_voltage 0 overall_state Normal prog1_time: 00:00 prog2_time: 05:00 prog3_time: 09:00 prog4_time: 13:00 prog5_time: 17:00 prog6_time: 21:00 prog1_charge: false prog2_charge: false prog3_charge: false prog4_charge: false prog5_charge: false prog6_charge: false prog1_capacity: 40 prog2_capacity: 35 prog3_capacity: 40 prog4_capacity: 50 prog5_capacity: 50 prog6_capacity: 40 battery_shutdown_cap: 20 use_timer: 1 priority_load: 1 dc_temp: 50.4 ac_temp: 48.7 ------------------------------------------------------------------------------ Attempting to update the following sensor entities Sending to http://http://192.168.0.87:8123 ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Reading settings entity -> solarsynk_<>_inverter_settings ------------------------------------------------------------------------------ /run.sh: line 560: [: ==: unary operator expected Helper entity input_text.solarsynk_<>_inverter_settings has no value. Therefore no inverter setting will be sent for change. Clearing previously set temporary settings. Fetch complete for inverter: <> Fetching data for serial: <> Cleaning up old data. Please wait while curl is fetching input, grid, load, battery & output data... ------------------------------------------------------------------------------ Inverter Information Brand: Deye Status: Normal Max Watts: 8000 Plant ID: <> Plant Name: DirkjLouw Inverter S/N: <> ------------------------------------------------------------------------------ Data fetched for serial <>. Enable verbose logging to see more information. If ALL values are NULL then something went wrong. battery_capacity 420.0 battery_chargevolt 0.0 battery_current -1.2 battery_dischargevolt 0.0 battery_power -64 battery_soc 98.0 battery_temperature -100.0 battery_type 1 battery_voltage 53.9 day_battery_charge 4.0 day_battery_discharge 0.9 battery1_voltage 0.0 battery1_current 0.0 battery1_power 0.0 battery1_soc 0.0 battery1_temperature 0.0 battery1_status 1 battery2_voltage 0 battery2_current 0 battery_dischargevolt2 0 battery2_power 0 battery2_soc 0 battery2_temperature 0 battery2_status 0 day_grid_export 0.0 day_grid_import 5.0 day_load_energy 8.70 day_pv_energy 6.30 grid_connected_status 1 grid_frequency 50.2 grid_power 28 grid_voltage 240.0 grid_current 1.7 grid_power1 0 grid_voltage1 0 grid_current1 0 grid_power2 0 grid_voltage2 0 grid_current2 0 inverter_frequency 50.2 inverter_power 1082 inverter_current 4.6 inverter_voltage 241.2 inverter_power1 0 inverter_voltage1 0 inverter_current1 0 inverter_power2 0 inverter_voltage2 0 inverter_current2 0 load_frequency 50.2 load_current 0.0 load_power 1103 load_voltage 240.5 load_current1 0.0 load_power1 1103 load_voltage1 240.5 load_current2 0.0 load_power2 1103 load_voltage2 240.5 load_totalpower 1103 load_upsPowerL1 0.0 load_upsPowerL2 0.0 load_upsPowerL3 0.0 load_upsPowerTotal 1103.0 pv1_current 5.1 pv1_power 1264.0 pv1_voltage 252.5 pv2_current 0.0 pv2_power 0.0 pv2_voltage 2.5 pv3_current 0 pv3_power 0 pv3_voltage 0 pv4_current 0 pv4_power 0 pv4_voltage 0 overall_state Normal prog1_time: 00:00 prog2_time: 05:00 prog3_time: 09:00 prog4_time: 13:00 prog5_time: 17:00 prog6_time: 21:00 prog1_charge: false prog2_charge: false prog3_charge: false prog4_charge: false prog5_charge: false prog6_charge: false prog1_capacity: 40 prog2_capacity: 35 prog3_capacity: 40 prog4_capacity: 50 prog5_capacity: 50 prog6_capacity: 40 battery_shutdown_cap: 20 use_timer: 1 priority_load: 1 dc_temp: 52.0 ac_temp: 49.4 ------------------------------------------------------------------------------ Attempting to update the following sensor entities Sending to http://http://192.168.0.87:8123 ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Reading settings entity -> solarsynk_<>_inverter_settings ------------------------------------------------------------------------------ /run.sh: line 560: [: ==: unary operator expected Helper entity input_text.solarsynk_<>_inverter_settings has no value. Therefore no inverter setting will be sent for change. Clearing previously set temporary settings. Fetch complete for inverter: <> All Done! Waiting 300 sesonds to rinse and repeat.

Hi Martin, Thank you for the post. I gathered about the SolarSynk Addon that pulls information and stores it in entities and I can have a look at them there. What I am after now is to get a display like SlipX cards. From reading your post it sounds as easy as changing the name of the entity but the part I do not understand is the current SlipX flow works with Sensors setup in the configuration.yml. So I was hoping of getting a simple example of how one has setup a graphical view of the solar. Surely one do not go into settings, devices and services and then entities OR go to history and view entities.

Hi JeremyLondon, So to understand you correct, I can then just check under: Settings,Devices & services, Enttities. There I find all the values and some that are unavailable. So follow up question: 1. How would I now get a nice flow chart or something similar to what Slipx has? Cause from first post in this discussion I thought I would just be able to change the name of the sensor but what I can see there is no sensor if its not configured in the configurations. So should I then add stuff in my configuration.yaml?

Noob question and help needed or just comments to read a specific post further would help. So I added the add-on. Verbose logging enabled. I can see the information returned in the logs from the inverter: Please wait while curl is fetching input, grid, load, battery & output data... ------------------------------------------------------------------------------ Inverter Information Brand: Deye Status: Normal Max Watts: 8000 Plant ID: <plantID> Plant Name: <plantName> Inverter S/N: <Serial> ------------------------------------------------------------------------------ Data fetched for serial <Serial>. Enable verbose logging to see more information. If ALL values are NULL then something went wrong. battery_capacity 420.0 battery_chargevolt 53.8 battery_current -45.87 battery_dischargevolt 0.0 battery_power -2287 battery_soc 54.0 battery_temperature 28.6 battery_type 1 battery_voltage 49.9 day_battery_charge 3.0 day_battery_discharge 1.0 battery1_voltage 0.0 battery1_current 0.0 battery1_power 0.0 battery1_soc 0.0 battery1_temperature 0.0 battery1_status 1 battery2_voltage 0 battery2_current 0 battery_dischargevolt2 0 battery2_power 0 battery2_soc 0 battery2_temperature 0 battery2_status 0 day_grid_export 0.0 day_grid_import 6.9 day_load_energy 8.40 day_pv_energy 5.20 grid_connected_status 1 grid_frequency 49.86 grid_power 20 grid_voltage 238.1 grid_current 1.1 grid_power1 0 grid_voltage1 0 grid_current1 0 grid_power2 0 grid_voltage2 0 grid_current2 0 inverter_frequency 49.9 inverter_power 1147 inverter_current 4.8 inverter_voltage 239.2 inverter_power1 0 inverter_voltage1 0 inverter_current1 0 inverter_power2 0 inverter_voltage2 0 inverter_current2 0 load_frequency 49.86 load_current 0.0 load_power 1151 load_voltage 238.4 load_current1 0.0 load_power1 1151 load_voltage1 238.4 load_current2 0.0 load_power2 1151 load_voltage2 238.4 load_totalpower 1151 load_upsPowerL1 0.0 load_upsPowerL2 0.0 load_upsPowerL3 0.0 load_upsPowerTotal 1151.0 pv1_current 7.8 pv1_power 1801.0 pv1_voltage 233.3 pv2_current 7.8 pv2_power 1770.0 pv2_voltage 230.4 pv3_current 0 pv3_power 0 pv3_voltage 0 pv4_current 0 pv4_power 0 pv4_voltage 0 overall_state Normal prog1_time: 00:00 prog2_time: 05:00 prog3_time: 09:00 prog4_time: 13:00 prog5_time: 17:00 prog6_time: 21:00 prog1_charge: false prog2_charge: false prog3_charge: false prog4_charge: false prog5_charge: false prog6_charge: false prog1_capacity: 40 prog2_capacity: 35 prog3_capacity: 40 prog4_capacity: 60 prog5_capacity: 60 prog6_capacity: 45 battery_shutdown_cap: 20 use_timer: 1 priority_load: 1 dc_temp: 48.7 ac_temp: 44.4 ------------------------------------------------------------------------------ Attempting to update the following sensor entities Sending to http://http://<ip>:8123 ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Reading settings entity -> solarsynk_<Serial>_inverter_settings ------------------------------------------------------------------------------ /run.sh: line 560: [: ==: unary operator expected Helper entity input_text.solarsynk_<Serial>_inverter_settings has no value. Therefore no inverter setting will be sent for change. Clearing previously set temporary settings. Fetch complete for inverter: <Serial> Fetching data for serial: <Serial> Cleaning up old data. Please wait while curl is fetching input, grid, load, battery & output data... ------------------------------------------------------------------------------ Inverter Information Brand: Deye Status: Normal Max Watts: 8000 Plant ID: <plantID> Plant Name: <plantName> Inverter S/N: <Serial> ------------------------------------------------------------------------------ Data fetched for serial <Serial>. Enable verbose logging to see more information. If ALL values are NULL then something went wrong. battery_capacity 420.0 battery_chargevolt 0.0 battery_current -18.5 battery_dischargevolt 0.0 battery_power -919 battery_soc 53.0 battery_temperature -100.0 battery_type 1 battery_voltage 49.7 day_battery_charge 0.8 day_battery_discharge 1.3 battery1_voltage 0.0 battery1_current 0.0 battery1_power 0.0 battery1_soc 0.0 battery1_temperature 0.0 battery1_status 1 battery2_voltage 0 battery2_current 0 battery_dischargevolt2 0 battery2_power 0 battery2_soc 0 battery2_temperature 0 battery2_status 0 day_grid_export 0.0 day_grid_import 5.2 day_load_energy 8.30 day_pv_energy 2.40 grid_connected_status 0 grid_frequency 49.96 grid_power 0 grid_voltage 239.6 grid_current 1.7 grid_power1 0 grid_voltage1 0 grid_current1 0 grid_power2 0 grid_voltage2 0 grid_current2 0 inverter_frequency 49.9 inverter_power 1159 inverter_current 4.8 inverter_voltage 240.8 inverter_power1 0 inverter_voltage1 0 inverter_current1 0 inverter_power2 0 inverter_voltage2 0 inverter_current2 0 load_frequency 49.96 load_current 0.0 load_power 1183 load_voltage 239.8 load_current1 0.0 load_power1 1183 load_voltage1 239.8 load_current2 0.0 load_power2 1183 load_voltage2 239.8 load_totalpower 1183 load_upsPowerL1 0.0 load_upsPowerL2 0.0 load_upsPowerL3 0.0 load_upsPowerTotal 1183.0 pv1_current 9.1 pv1_power 2208.0 pv1_voltage 245.8 pv2_current 0.0 pv2_power 0.0 pv2_voltage 2.3 pv3_current 0 pv3_power 0 pv3_voltage 0 pv4_current 0 pv4_power 0 pv4_voltage 0 overall_state Normal prog1_time: 00:00 prog2_time: 05:00 prog3_time: 09:00 prog4_time: 13:00 prog5_time: 17:00 prog6_time: 21:00 prog1_charge: false prog2_charge: false prog3_charge: false prog4_charge: false prog5_charge: false prog6_charge: false prog1_capacity: 40 prog2_capacity: 35 prog3_capacity: 40 prog4_capacity: 60 prog5_capacity: 60 prog6_capacity: 45 battery_shutdown_cap: 20 use_timer: 1 priority_load: 1 dc_temp: 47.0 ac_temp: 43.2 ------------------------------------------------------------------------------ Attempting to update the following sensor entities Sending to http://http://<ip>:8123 ------------------------------------------------------------------------------ ------------------------------------------------------------------------------ Reading settings entity -> solarsynk_<Serial>_inverter_settings ------------------------------------------------------------------------------ /run.sh: line 560: [: ==: unary operator expected Helper entity input_text.solarsynk_<Serial>_inverter_settings has no value. Therefore no inverter setting will be sent for change. Clearing previously set temporary settings. Fetch complete for inverter: <Serial> All Done! Waiting 300 sesonds to rinse and repeat. So it seems to CURL correct and everything is good. Questions: 1. Do I need to configure something in the /homeassistant/configuration.yaml to be able to use any of these values? 2. Do I now add a powerFlow card like: Slipx Power Flow Cards ? I followed the Node-red and slipx but I could not get my two inverters working. Stumbled across the above implementation and just like to get an overall plain look at what my house uses and plot graphs.