Mattyboy839

Hi Nabeel, Just been giving this some more thought and I have some more thoughts. My situation is that I only get grid at night from approximately 10pm - 5am. I want to be able to charge the batteries with grid so that pv and battery can take load when the grid goes off in the morning and batteries to be charged throughout the day with pv. keep in mind I will also not be exporting power to the grid side and only be supplying backup side. Would these settings work for when I do install my pv: Discharging 1 5am-15:30 0A Discharging 2 15:30-22:00 0A Charging 1 22:00-5:00 50A Whilst I don't have the PV connected I use the tou settings that you have? Thanks !

Thank you for the help Nabeel, much appreciated 🙏 and to update the firmware it’s as simple as sending the dongle sn to solis?

Should mention that the flow of settings go from pic 1 to 3.

I have also set it up as installer and connected via Bluetooth aswell.

I should add that I am using the pro version

Thanks for the swift response. 1. my app doesn't have a 'storage mode' option as such. I can go work mode and then click self use mode. only self use mode is enabled. I don't have an 'allow export' option, could this just be different app versions? 2.confirm to get this schedule you have to enable the time of use switch? Thanks !

Hi all, I have recently installed a 8kw s6 hybrid inverter with a battery and soon to be pv and have two questions. Currently the reserve SOC is 100% Questions: 1. The inverter is reading grid voltage etc and yet the battery is supplying the load even whilst being under the reserve SOC. What could be causing the inverter to not supply the load and charge the battery with Grid power? 2. I am not wanting to export any power to grid. On Deye inverters there is a setting 'zero export to ct', I am struggling to find this setting or equivalent on the solis cloud app. Could someone please point me in the direction of this setting on the solis cloud app. Any help would be appreciated! Regards