Thembani

Is this the drawing

I am so sorry to do this, I am new in this space. where do I find your post with the drawing? Did you connect it in the Distribution Board?

Can Nuno please show how and where he bonded his neutral to ground. I have the problem of neutral to ground voltages of up to 110V

Hi, I have 2 x 5kW inverters connected in parallel and 2 banks of batteries (4 x 200Ah connected in series in each bank) connected in parallel. The battery capacity reduces to 70% from 95% on initial loading and thereafter slowly discharge at an acceptable rate. The connected load is about 750kW. I tested the batteries with the battery analyser and they showed 100% State oh Health and 95% State of Charge before connecting the load. What could be the problem

Hi, I have 2 inverters (5kW) connected together. The Watchpower software shows double the output active power when compared to the inverter. However every 20 seconds it shows the correct reading momentarily.