December 2, 20196 yr Hi Everyone Please can someone help me. My client has bought 8 Harbin Coslight GYFP48100T batteries on what looks like an auction. I need to connect them in parallel, however I am not sure about the communication between the batteries. Someone did install these prior, but without any comms between the batteries. Has anyone installed some of these batteries or maybe has a installation manual. Thanks and regards
December 2, 20196 yr Hi Jay I was in the same predicament for one of my clients. You can forget about getting any manual for these batteries. I even went so far as to email the manufacturer in India, but they are so reluctant to give any info on them. The best I could find was a Boobtube video. It is in some foreign language, but it does give a basic understanding of what to do. The difference with the 48100T is that you don’t open the front cover to put the SD card into the master battery, there is a slot in front above the “read port” Use this link: Regards Solaris
December 3, 20196 yr Author 8 hours ago, Solaris said: Hi Jay I was in the same predicament for one of my clients. You can forget about getting any manual for these batteries. I even went so far as to email the manufacturer in India, but they are so reluctant to give any info on them. The best I could find was a Boobtube video. It is in some foreign language, but it does give a basic understanding of what to do. The difference with the 48100T is that you don’t open the front cover to put the SD card into the master battery, there is a slot in front above the “read port” Use this link: Regards Solaris Hi Solaris. Thanks for the info. Do you possible have an idea about the dip switch setting. Regards Jay
December 3, 20196 yr The video describes it like this: Master battery is switch number 6 up, all others down. Second battery is switch number 5 up. Third battery is switch numbers 5 & 6 up. Fourth battery is switch number 4 up etc.... What you can do is literally switch your WiFi on and see the address of each module on your phone. It will say Cos-Link01, Cos-link02, etc.... Aos-link01, etc.. will mean that the address has not been set.
December 4, 20196 yr Some time ago I made this list of addresses where 0 means down and 1 means up on the address switch.
October 3, 20205 yr 23 hours ago, Marius de Vos said: What would the master password be? If you mean the password to access the WiFi, you can try 987654321, however most of them have a security feature where only a certain computer can connect to them.
December 26, 20205 yr Good day guys. My dad has 2 of these batteries, and now after a year, the second one battery in oaralel is flashing alternatle (R) green, and (A) red. And the battery does not seem to charge. What does this meen? I am unable to find a manual, or reach the service provider. Can someone hlp me to reset the pc board? Regards. Bertie
December 26, 20205 yr 11 hours ago, Bertie said: What does this meen? The red alarm light means one of two things. Either the battery is flat and needs to be charged, or the battery has been overcharged. How many green lights are on?
January 21, 20233 yr On 2020/12/26 at 11:05 PM, Solarphile said: The red alarm light means one of two things. Either the battery is flat and needs to be charged, or the battery has been overcharged. How many green lights are on? Solarphile, what do I do then in this case because I have a similar problem as Bertie. There are 4 green lights on meaning that the battery is not flat
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.