Jump to content

Jo-Jo

Members
  • Posts

    5
  • Joined

  • Last visited

Everything posted by Jo-Jo

  1. Good afternoon. We have just installed a 5Kw sunsynk inverter with a pylontech up5000 battery, this is new to me the up5000 has an audible alarm every 5sec. The battery is fully charged. Please assist. BR
  2. Good afternoon Coulomb. On the Rentech rating label: The model number is INFINI V 5K-48. BR Johan
  3. Good afternoon Coulomb. Thank you very much for the feedback, as soos as I have the photo of the rating label I will supply it. BR Johan
  4. Good afteroon. I did an istallation for 2 clients of us, they are using the Renewable Technolohies inverters ( RENTEC), it's a 5KW inverter. The inverter works fine but when it runs on batteries it does not switch over to utility to charge the batteries. What can i do to remedy this problem. BR Johan
  5. Good afternoon. I went to a client that has 2 x 5KW Axpert inverters installed, and was told that this morning it did not change over to utility to charge the batteries. This is not some thing that happens everyday. The setting voltage point back to utility source when selecting Solar first in program 01 has been increased to 49V.The Float voltage for the batteries has been set to 51.2V. The setting voltage point back to battery mode when selecting solar first in program 01 is set to 52.0V. The bulk charging voltage is set to 52.5V and the Float charging voltage is set to 51.2V. The Low DC cut-off voltage is set at 46V.The batteries that the client is using is Narada 48 NPFC 50 NC. I would like to know if somebody would be able to help me please. BR Johan
×
×
  • Create New...