dxmarty

This morning I decided to just re-check the voltage on the AC Input side of the inverter. Low and behold, as I put the probes on the terminals I heard a clicking noise and suddenly the inverter showed the AC Input icon on the screen again. Maybe it was just a little bit of corrosion... Anyways, thanks. I'll keep an eye on it - at least now knowing where the problem possibly exists.

I'm no electrician. There is a "Input Breaker" switch (button-like) at the bottom of my inverter - which does not feel like a switch as the button is loose. Not sure if this is what you refer to as a 'resettable fuse'? Or is the fuse under the 'hood'. I mean I will have to take the cover off?

Hi. Help or direction will be greatly appreciated. I have the above-mentioned inverter and it has been running flawlessly for about 26 months. After load-shedding (or possibly before - not sure) I realised that the grid voltage/frequency on the inverter (I can see it through ICC solar) was 0/0. Also on the display panel on the inverter there is no grid icon. It is if the grid is not there, although I measured the voltage and there is grid supply. Maybe something failed inside the inverter? Fuse or something? Any ideas or should I disconnect and take to Mecer for repairs?