jvniekerk.it

Just uploaded the file here https://powerforum.co.za/files/file/204-hinaess-computer-software/
You will need one of these 2 usb to r485 connectors
https://www.robotics.org.za/W17286?search=rs485&page=2 I used this one.
https://www.robotics.org.za/RS485-MINI?search=rs485 but this will work too
Firmware file can be requested in what'sApp group https://chat.whatsapp.com/KPUBd7ZC89RL7bIeTRVBRs
Use it for cell voltage monitoring, updating frimware, can't change any bms settings though.

Just uploaded the file here https://powerforum.co.za/files/file/204-hinaess-computer-software/
You will need one of these 2 usb to r485 connectors
https://www.robotics.org.za/W17286?search=rs485&page=2 I used this one.
https://www.robotics.org.za/RS485-MINI?search=rs485 but this will work too
Firmware file can be requested in what'sApp group https://chat.whatsapp.com/KPUBd7ZC89RL7bIeTRVBRs
Use it for cell voltage monitoring, updating frimware, can't change any bms settings though.

I am using the cable recommended by solar assistant and connecting through the third connector on my JK inverter bms 
https://solar-assistant.io/help/battery/jk-inverter-bms 

Found the reasoning behind this it uses a Pace bms with a charging balancer. The restrictions are built into the bms in order to give the cell balancer time to do its work. When the imbalance between the cells are higher the limit charge current will be lower. Hope this helps someone.
Used the following to access the cell voltages etc.
Pace PBMSTools
https://cdn.shopify.com/s/files/1/1249/8241/files/PbmsTools_V2.5EN.zip?v=1600336921
Cable 
https://solar-assistant.io/shop/products/pace_rs232
Drivers
https://cdn.shopify.com/s/files/1/1249/8241/files/CDM21228_Setup.zip?v=1621934743