Fanie Junior

Thanks for the concern, I solved the issue by changing the inverter. I now have a sunsynk 8kw, not even one problem yet. The software is great

The alarm is buzzing on the inverter

@Dyness I managed to use US2, customized float and charge voltage using the settings you gave me. We had an overcast sky until today, the alarm buzzed again, I took program 19 down to 52v and 20 to 52v again. Tried again and it buzzed, from my observation there's a software problem somewhere because the behavior is not consistent

@Dyness I managed to use US2, customized float and charge voltage using the settings you gave me. We had an overcast sky until today, the alarm buzzed again, I took program 19 down to 52v and 20 to 52v again. Tried again and it buzzed, from my observation there's a software problem somewhere because the behavior is not consistent

Ok, I will try to set float voltage first then I try to set charge voltage back to 53.5

Program 19 can not go below 54v, it refuses

Ok, it's in communication, but the inverter keeps charging even if the codes pop up with alarm

Yes, program 19 only come down to 54, if you input 53.5v it goes back to 54v

@Dynessplease help me understand this: is it the battery that is responsible for cutting off charge when full or inverter reads voltage and disconnect charge?

I set to US2 mode, program 19 can not go less than 54v so I left it at 54v, program 20 I set it to 52.5v and 21 to 47v. It charges ok until it goes past 52.5v sometimes 53v then it starts buzzing. It goes way up to 53.5v or slightly above then drain rapidly to 52-52.5. after this it doesn't go above 52.5 but it keeps buzzing. This is exactly what it does when I set to LI in program 05 or to US2. What I have realized is that this error is meaning battery voltage has exceeded the limit. Why does it exceed limit? I do not know but that's where the answer is.

I did but still I get the same error codes.

Program 19 refused to go below 54v but other settings I did as you said, will give you update. Does it mean anytime I buy other batteries I have to send them for a software upgrade?

Ok, thank you, I'm applying those settings right now and will come back to you.

I'm in Zimbabwe, I just bought these batteries recently, imagine how it feels. Is there any other way I can get assistance

I do not understand, do I have to send the batteries somewhere or ? According to the serial numbers I gave you does it mean they are all outdated? M sorry for asking much I'm very new to dyness batteries