Roy_ZA

Unfortunately don't have the Riot installed.

Currently have a Sunsynk 5kw inverter, paired with 1 Hubble 5Kw battery. Trying to figure out whether my batteries are discharging too quickly. Refer attachments. At 18:00 SOC was 90%. Battery then more or less consistently discharged 0.35kW from 18:00 to 20:20. If I add in the 150w used by the inverter, it should result in 0.5kW being discharged. So in 2 hours, I'm expecting that only 1kW of battery power should have been used. The battery discharged from 90% to 24% though, which equates to +- 3kW. Is my math wrong? @HubbleLithium, I logged a ticket, but it was closed without providing any feedback, ticket #1686.

Hi....has anyone managed to resolve the EA E7 error?

Hi. So I just noticed the attached error on my prepaid meter. Is this normal, as it's not configured to export to grid?

Thanks. Will update settings as per 1 and 2. Not sure if the ct coil is before or after. I've attached a Pic of if the dB though. The green arrow shows the cable the ct coil is connected to, and the orange arrows are the Geysers and stove.

Planning on draining down to 20%. Then I've got the Geysers and stove on the non essential side. Assuming I need to set SOC to 20% instead od 80%?

Thanks for the prompt feedback guys. I'll tick it and monitor tonight.

Pics attached.

Hi guys, I had the following system installed yesterday. 5kw sunsynk inverter 1 hubble am-2 10*595w ja solar panels, 2 strings of 5 panels, facing east and west. Happy with the installation, but there seems to a phantom 2w of solar being generated at night, which I suspect is preventing the inverter from drawing from the battery at night. Has anyone experienced something similar?

Would you mind elaborating what the main benefit of SunSynk is? Currently trying to decide between SunSynk and GroWatt.