ReinhartS

Good day all, if anyone has a spare Goodwe GM1000 meter, pls let me know. You might have one if you installed a ESG2 as Backup only, as the meter isn't required for those installs. We are needing one for a spare setup we have. Cape Town. Many thanks Reinhart

Possibly there is a way to "bridge" the meter to only worry about or only see 1 phase?

Has anyone experience with using the GM3000 3 Phase Smart Meter instead of the GM1000 single Phase meter on a home with only 1 of 3 Phases backed up? Goal: 1. To allow owner to monitor total load 2. Still allow discharge to occur to support essential load circuit fully I.e Single phase solution with 3 Phase monitoring? Lastly, anyone know if the GM3000 can work simply as a GM1000 if I just not CT the other phases? Not really wanting to change the meter if in future GW allow 3P monitoring properly...as to date it hasn't worked out as per goals above. Thanks

I see, that's strange. Eco mode when used smartly is actually very good. I recommend you inform your installer or go direct to GW tech support for them to help set as you wish. Until the new SEMS is released, seems there are going to be all sorts of challenges.

I believe Eco mode indicates as such when in the Time period you have set it to Charge or Discharge. In your case, take a look at 2215 to confirm. Outside of that it will default to General mode. In your case take a look again at any time before 2200 or after 2240 to confirm.

SEMS Portal is getting a revamp apparently as it def is iffy and doesn't permit Configuration Changes. SolarGo and via Tech Suppor only way to update parameters.

Goodwe asked me to open the port TCP 20001 on my router, which I have done but it hasn't worked yet. The SEMS App Configure tab seems to need more attention. Does it actually work for anyone?