Veneficus

And does anyone have the kodak serial cable I can borrow or buy so I can try it from PC instead

Ran upgrade using USB mini port twice It says usb then yes then I press yes and it then takes the no away but sits there for 15 minutes Then goes back to original start screen but no buttons work Left that for 10 minutes and nothing Rebooted and old version showing What am I doing wrong

Thanks much appreciated

Has anyone got a link where I can download the firm ware for this unit?

Wifi module firmware 3.1.0.1 Main unit 90.28 I have heard this is bad firmware version

Will check everything later and post And thanks for responding

Can someone please provide me with link to stable current OS for Kodak king 7.2 My OS has low charge rate and I need to update it to get bit better throughput

Has anyone got updated link to newest stable OS?

Thanks

What is the best firmware for Kodak King 7.2 to insure it pulls full power from the panels Mine seems to be getting allot less than the panels rated output and I heard that on some of the OS versions it was getting allot less power out than correct OS I have 16x410w panels on 2 strings But in general maxing at about 4kW Serial 92932108602457 I am currently on 90.28

One thing where can I in anycase get the latest firmware that properly uses your panels to their maximum? I have 16 410w panels in 2 strings And highest I get from them when fully in the sun is 4.3kW So I just want to rule out possible driver issue

Ah wait thanks On the software it does not have that But on the menu options it has Thanks for the help

Kodak 7.2 currently on 90.28 firmware It seems to have quite limited available battery configuration and limited output from panels It only gives AGM, FLD, USER, Pylon, Weco and Sol as options I have gotten 2 Freedom Won etower batteries Can anyone advise where I can get best firmware update for this

Firmware is on 3.1.0.1 at the moment for controller 90.28 for the unit Will check for the latest firmware

What do you do if your Kodak is not giving the LIB option Just user Pylon Weco Sol on freedom won set?

Getting new battery and BMS soon Will see what it does with other battery and BMS system

Voltage on each string goes up to average 270-280V When about 1.6kW per string is provided the unit sits at about 220v The 2 strings is connected to PV1 and PV2 inputs

Any advice?

Good day Ok so I recently decided to go solar Installed Kodak 7.2 Max inverter 16 x 410w Canadian solar panels pointing North at about 30 degrees for tile roof angle 8 per string on each inverter input Currently only have 4.8kWh battery installed But will be going 15kWh One issue I am getting is the panels seem to be maxing out at about 3.2kW maximum They appear to be giving out about 50% of the listed power Can someone advise what could cause this? I specifically make sure that the used power to charge the battery and used beyond that is higher by fair margin above what is coming in I know that if my required usage was only 3.2kW then the inverter would not push above that