Deep 6

Thanks for the link. Great news. Much appreciated

Aaa ok. I understand. I thought that is was common practice to parallel the 2. Just out of curiosity. When they parallel 2 x say 4kw inverters to reach 8. Can you for instance pull a single load of 8kw or are you limited to 4 kw per inverter? In other words will the same sinario apply to bigger inverters.

Ok thanks. So it is possible then. I will then try and find someone that can help me synchronize the 2 inverters then. Thanks for your advice. Much appreciated.

Hi there Thanks for your advise. Then i dont see the point of connecting another inverter to increase my output capacity to use a appliance that use more than 1200w. I was under the impression that if you parallel them then I can increase my output to use with heavier load items, and not more items at the same time running off the combined inverters.

Hi there. Thanks for your message. I have 2 x 12v batt and I will only use the full 2000W when the sun is up and I have solar input to the system and only for short periods. I dont quite follow with the wiring. So my pos. and neg. wires will run from the one 12v batt to the other and from there I will then have 4 wires running to the 2x inverters. 2 x pos and 2 x neg to the inputs on the inverter. And you are saying that my output will then be from either one of the 2 inverters? I am not to clued up on the matter but this dont sound right to me, or am I missing something?

Good day I hope that someone here can help me. I have an camping caravan with a Victron phoenix 12/1200. I would like to add another one to increase my load. What do I need to do and how would the wire diagram look like. Your advise on the matter would be greatly appreciated. Regards Erik