Millmatt

Morning Does the same custom cable work with a growatt inverter. 5 and 6 to 1 and 2 pin?

Time of use screen .. Had a feeling it might be activated. Ok . I'll go check.

Which screen is that ? Home screen or the one in battery bms ?

It's a dyness 4.8kw Connected by bms cable When I click on the Battery info it shows everything as it supposed to. Is this a problem you seen before.or maby a setting?

Hello all I have a 5kw Deye inverter running a 4.8kw dyness battery. There are 2 things it's doing which I need advice on. 1. The battery only charges to 80% . Is there a battery setting or a charge setting that might need to be activated or might need to be changed . Is charge times for ac charge of the battery perhaps? 2. The other issue is that the other night the inverter started using battery power when there was no load shedding. The ac green light was on but the inverter showed eskom was disconnected with a red cross and the battery was draining down to supply the load . Is this a setting too or something more critical ? I'm told it could be that the grid and the inverter are not stabilizing together. Or Is it a wiring issue as it was fine before. It happened just after 12am. Thank you