SolarNovice88
Members-
Posts
3 -
Joined
-
Last visited
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
SolarNovice88's Achievements
-
Using this guy: https://powerforum-store.co.za/products/cfe-battery-lithium-ion-5-12kwh-51-2v-100ah. Working out so far, have run a kettle, dishwasher and washing machine on it (5kw Deye, I was stress testing). You can find it a bit cheaper here:https://solaradvice.co.za/product/cfe-5-1kwh-lithium-ion-battery
-
SolarNovice88 reacted to a post in a topic: 3 X Kodak OGS5.6/ 3 X Livoltek BLF51-5 Pairing
-
SolarNovice88 reacted to a post in a topic: Sunsynk aux load for geyser
-
SolarNovice88 reacted to a post in a topic: Inverter size
-
SolarNovice88 reacted to a post in a topic: How to safely change settings Deye Inverter
-
SolarNovice88 reacted to a post in a topic: How to safely change settings Deye Inverter
-
SolarNovice88 started following Victron Multiplus II and MPPT vs Sunsynk , How to safely change settings Deye Inverter , Replacing an old DB and 1 other
-
Hi All, I recently purchased a 5kW Deye inverter and got a F13Grid_Mode_changed fault when I changed the modbus sn from 00 to 01 while it was connected to load. This caused a fault and made it beep constantly. I flipped the bypass switch to on to isolate the inverter from the house load, turned off the AC input to the inverter so no power was coming in by and turned the inverter off. I waited a few minutes and then turned it back on and all seems well now(no additional faults I can see). What I wanted to know was what is the best way to change settings on this model of inverter without causing such alarming faults. Regards
-
SolarNovice88 reacted to a post in a topic: Bloemfontein Install - Semi DIY
-
SolarNovice88 reacted to a post in a topic: Bloemfontein Install - Semi DIY
-
SolarNovice88 reacted to a post in a topic: SunSynk - Inverter Monitoring
-
SolarNovice88 reacted to a post in a topic: Passthrough on Sunsynk Hybrid Inverter
-
SolarNovice88 reacted to a post in a topic: Sunsynk 8kw no output on load
-
Hi @recre8, I’ve heard versions of this on the internet, is there any official source for this? Trying to understand how far apart the Deye and Sunsynk are