fstofberg

Deye 18kw Single Phase Hybrid Inverter SUN-18K-SG01LP1-EU-AM3-P MAIN：E029-1727 HMI：0000-C384 Protocol Version：0301 Lithium Battery Version Number：0000200D LCD Type：8102 English Version：1001

For the past 4 month my inverter DC Temp stayed between

Just another update 5 months later and so far the system is running well only had to use the grid a couple of times when raining for a couple of days.

For the past year I have saved a total of R83k on my Tshwane Electricity bill, now if they had a better incentive to push back to the grid the savings would be much better. total since installing the system in 2022 I have saved almost R230k so next year the system would be paid off.

Will see the generation at my house in summer but starting to break 3MW per month after adding some panels on east/west roof.

Here is the firmware version on my 16KW Inverter MAIN：9028-1726 HMI：0000-C37B Protocol Version：0201 Lithium Battery Version Number：0000200D LCD Type：8102 English Version：1001

@Chris_S that is what I'm seeing on my inverters, I upgraded to the latest firmware, but it never goes above 19.5A per MPPT, I have 2 of the 8KW units the old unit showed 22A per MPPT and the new one shows 26A per MPPT but they both stop at 19.5A. As @TimCam suggested my next step is going to be the 16KW as I don't have space to mount both 8KW units next to each other.

Thanks for the feedback and it makes sense will try to disconnect one of the mppt connectors tomorrow and test otherwise as you suggested leave it unless I need more power.

My 8KW Sunsynk seems to clip power at 19.4A on both MPPT's, is this normal as I had the firmware upgraded but seems to do the same? Firmware Version: SW Ver. M 6.0.2.7 / S 1.7.2.4 / C E.4.3.9 Is the only option to go for a bigger inverter like the 12KW or 16Kw to make more power?