Wikus

Bumping in case it got lost.

Hi Gents, Looking for a replacement battery for a Magneto 1200W PPS - Got a model No M6S10P-21700-R001. Anyone know where to look or whom to contact? Magneto themselves quote on a different model which makes absolutely no sense. Nor can they provide a datasheet etc. I am not interested in burning down a house. :/

It happened early morning for two days consecutively (when I noticed - with the logger discarding alarms I may have missed other dates I did not look into the system for a couple of weeks) and with no intervention it has not happened again for the last two days. No load changes - the system has been installed for a year - load balancing is fine. It is 60 % you are correct. New Deye can do 100 % but I have not seen this myself. I am going to leave it for a bit - only thing I can think of is the battery cycling to setpoints with the morning being the lowest point. If I can get it to consistently do W01 on reaching the setpoint I will have my answer. I do however believe a low battery warning should trigger not a "reserve" warning.

Thank you - nice to have some sort of reference.

Seems like a bad idea to have a triggered warning on installed systems at users' homes that have not been quantified - especially as this is electricity. If I were doing RND or trying to make a logger work or something to that effect it would be a different case. Or just a changelog notice from Sunsynk at the least if they are adding functionality.

Hi, Not at all - Sunsynk Inverter (12 kVA), with the Sunsynk logger and the Sunsynk 10 kWh batteries - which I was only later informed are not actually Sunsynk batteries but some sort of Herholdts thing. If it is a software address issue it can only be Sunsynk itself. Can I ask where you got that reference table from?

The F-range is faults, W- range is warnings but why the W-range is not described makes no sense to me.

Good day Forum buddies, Does anyone maybe have the list of warning codes for Sunsynk Inverters and their meaning? I do not understand why this would not be in a datasheet or user manual but I have not been able to find anything more than a couple of the Fault code meanings. I have an inverter with a W01- Reserve warning and no idea as to what it means or how serious it is.

Good day, I have been working with a couple of different GoodWe inverters and it seems to be a common thing that the inverters would forget their settings. I was wondering if it is a common thing? As an example just this last week we did the commissioning on two 60 kW grid tied inverters i.e. set country code, reconnect times, active power limitations etc and went through testing. Turned the inverters on, saw production and deemed the installation complete. Just the next day both inverters stopped working and "luckily" entered standby mode as they forgot the country code. I'm not really expecting help just looking for comment from the industry as I would personally try and avoid selling the brand due to this.