fmatute

Hello everyone, my Pylontech Force L1 battery shuts off after a few seconds of being turned on. The inverter, a Voltronics Aspect VMIII, had an F51 overload failure, and since then the battery won't start. I've disconnected everything and turned on only the battery, but it displays an error and shuts off after a few seconds. I've tried the different modules one by one, but the result is the same. I think the problem might be that the BMS has a protection setting preventing it from starting. Has anyone had experience with a similar issue and can offer some advice on how to revive the battery? Thanks, regards. VIDEO-2026-04-15-20-54-26.mp4

In the manuals that I have there is no section of the BMS. It only refers to configuring some type of battery. I try to find information about the different parameters of the Voltronic Inverter for Pylontech batteries, or Lib, because I only get communication between the BMS and the inverter in the 05 Pyl position.

Ok, in my manual it only goes to error 59. It has been a great help. Let's see if I can now locate why this happens Thank you..

Good morning, thank you for accepting me. I have a battery with BMS Seplos for 16 cells and an Aspect VMIII voltronic inverter, configured on 05 for Pylontech battery. When the battery reaches the discharge voltage and the inverter goes into line mode and starts charging the battery, an error 71 appears on the inverter screen. I can't find what that error is and it appears in the manual. Could you help me?