W Scheepers

Hi I did put my CT on my inverters incoming power with the arrow facing towards the inverters. It works good now, I dont want to power back to the non essentials....so it works the way I want it to now. My second problem. My pv only goes to the main inverter Both is set to time table settings and both is on load first. Problem is the second inverter still pull half the load from the batteries whhle the master tries to charge it from pv. Is there a way to make the second 1 use the grid as supply and not the batteries during the day when the master charges it...cause they are basicalle working agains each other in the charging sense.

I clamped it to the main incoming from the councel, If I understand you correctly I should basically clamp it @ the bottom of the breaker live that feeds the inverter input?

Hi..the Id's are set correct Both is seeing the ct clamp if I check the images? Where do I set the meter settings and limit export power? The ct is wired according to the manual...pin 3 and 4 and white left black right

Good Day All I need some advice please I have 2 x Deye 5kw inverters in parallell The ct clamp is o the master as per manual and the arrow in the direction to the grid. My question is...why is my slave inverter constanly feeding power back into the grid? About 200-300W The setting is zero export to ct. Both have the same firmware also.

Thank you Will follow those steps

Hi All I currently have 1 x 5kw Deye with 15kw battery and 1 string of panels. I am planning to add another 5kw inverter. So I understand the betteries have to go to both inverters so I will install another disconnecter switch going to the secondary inverter. My question is, I only have 1 string of panels, does it still only go to the master or does the pv also have to go to both inverters?

Hi Thank you

Hi...Thanks Will you perhaps share the settings with me? and what cable exactly is it that I should get from them?

Hi...I have the same setup, is your inverter connected to the battery? If so did you make up a special cable or how did you connect? Regards.