Kraai

Afternoon, I got a 5.5KW Diesel Gen with ATS and would like to couple it to 8KW Sunsynk Inverter. Inverter feeds 2 x 5KW batteries with 2 strings of 10 x 330W panels. Want to use Gen in case of emergency, when batteries drop too low. Still on the grid, but would like to go off with existing system if pos. Geyser is off grid on "geyser wise" system with own solar panels. Any body with experience on how to couple to start Gen Thanks

Ok do not need to add pictures, came right. Downloaded a manual and all settings was explained properly. Thx.

@ mzezman, will add pictures tomorrow. Thx

Afternoon Guys, Just finished installing a Sunsynk 8Kw inverter, 2x 5Kw Freedom won e-tower batteries and two strings 10x 365 W solar panels. Ja it was raining the whole weekend and every time I looked, the total on the two solar strings was 400 - 500 Watts. Now with no rain it is still the same. What I saw, when I put the electric kettle on, it draws about 2000Watts from the solar, so there are solar power some ware. Are there settings to adjust to push the extra solar power back on to the grid if I don't use it.? I did replaced 2x 3500W Solis Grid tied inverters wit this new setup. Thanks

Hi Guys, I got a very old house that has been build on to, and with two DBs that I not would like to split in essential and non essential if I can come away with it. I am busy installing a Sunsynk 8KW inverter with 2x Freedom won 5KW batteries. Got 20 x 360W panels in 2 strings that I used previously on a Grit tie system Is it possible to couple the one DB to the load and the other DB to the grid on the inverter, or must I go with the schlepp to re wire the DBs Thanks.

Hi Flarkit, installation looks very good. What brackets did they use to install the batteries upside and not flat.?