Skip to content
View in the app

A better way to browse. Learn more.

Power Forum - Renewable Energy Discussion

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

J M

Members
  • Joined

  • Last visited

  1. J M started following SEGEN SOLAR
  2. Good day @mbzn, My settings are as follows: 02: 150A 11: 150A 16: SNU (solar and utility) Best regards, JM
  3. Good day, @SEGEN SOLAR Can you please assist? Kodak OG-10 is not charging my batteries at anything more than 100A. Have 9240W of JA Solar panels installed on the 2 MPPT strings. Solar panels easily provide max power wirh clear skies. Based on the data sheet of the inverter, it should be able to supply 150A for either PV or Utility charging with a max charging of 150A. Is my understanding correct? I realised that the inverter only charges the battery bank at a maximum of 100A irrespective of what the inverter max battery charging current is set at (110A - 150A). Thought it might be a firmware issue and upgraded to version 90.01 No change to max charging current - still just 100A. Have 7 x 5.1kWh lithiums in parallel. Would like to charge batteries at a nominal 21A when solar charging allows. Any ideas as to what can be done to increase the charging current to data sheet specifications? Or is there something else I am missing? Best regards, JM

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.