FadiCha

Done

@Coulomb Just as an update my problem was resolved by the dealer (they are proficient it seems) they did 2 things: Updated both firmwares for main and secondary CPUs They changed a country setting from "Germany" to "India" Now the inverter has been on - stable - for more than a week! My only problem now is the reading it using the USB port which is not stable, it crashes every now and then. I have to use the inverter's ESC button for 3 seconds which resets the USB controller and my PC can then resume reading.

Same happening to me here (InfiniSolar V 4 rebranded as PCE Power 5.6KW) *Error 32* and not responding, I still have to take the inverter to dealer they said have a fix for it.... if not I will try the capacitor thing, nothing to loose, although this happens with PV disconnected so I don't know what the capacitor does then.

Thanks for your quick reply Coulomb, appreciated! I also contacted the dealer and as you said they instructed me to return the unit for inspection and repair which leaves me without power for a couple of days! I know a bit of electronics myself and installed my system on my own (had a bit of help though) so I will the document and see if this helps. Again thank you very much!

Greeting folks... I got an InfiniSolar V 4 (5.6KW) that trips into a code 32 warning screen (LCD shows only this error). I still have power but nothing seems to work via LCD (keeps flashing 32 with a triangle and an exclamation inside). Checked the user manual the error (warning, actually) is due to a communication board error - whatever that means. Inverter works fine after a complete reset (all terminals PV / Batt / AC off). But then again it trips into this mode. Some people suggested I upgrade its firmware. I contacted voltronic sales but they did not reply. Any suggestions that might help?

Greeting folks... I got an InfiniSolar V 4 (5.6KW) that trips into a code 32 warning screen (LCD shows only this error). I still have power but nothing seems to work via LCD (keeps flashing 32 with a triangle and an exclamation inside). Checked the user manual the error (warning, actually) is due to a communication board error - whatever that means. Inverter works fine after a complete reset (all terminals PV / Batt / AC off). But then again it trips into this mode. Some people suggested I upgrade its firmware. I contacted voltronic sales but they did not reply. Any suggestions that might help?