Cdninperu

Sorry that was a brain malfunction I have two array’s. One is 18x 370 watt panels 48.2voc they were in 3 panel strings now in 6 panel strings. Pointing north at 22degrees I’m in the southern Amazon jungle in peru. I am charging 16 6v 600ah ultracell flooded batteries. I also have an Outback charge control connected to another string of 9x 445w 48.9 voc panels. These I have pointing west to grab the latest sun of the day to top off the batteries. Thanks again for the help!

Thanks all changed my array to 3x6 now I get enough cloudy day voltage! Appreciate the help!

Cloudy day yes, I have 9 panels 370w in 3 panel strings on this array. I’m finding out that this inverter seems to be programmed to prioritize the loads not the charging. I can send the program settings also

Thanks for the response. If I run the generator the solar will go to charge the batteries as the gen supplies the ac load. If I don’t run the gen the solar and batteries only supply the ac load. Is there a way to set it so the solar charges the batteries as the first priority? That’s what my old one did. It would always charge the batteries first.

Just installed not charging any ideas?

Just installed a Growatt SPF 5000es into my system I had a Sigineer 5000H and they both have the same problem they won’t charge the batteries. Good voltage coming from the array supplying ac to the house but won’t charge. 48v flooded batteries