netkovski

Any response on the matter? Even a negative one 😉

Here are some pics of the situation 😉

Uh, I am not very verse at modbus changes and management. I am in Macedonia and we have many sunny days here. My current setup is 24 panels x 550w, toatal of 13,2 kw of solar panels. No batteries at the moment, still looking and choosing betweel Lifepo4 or lead acid. I have Voltronic Infinisolr 15 kw unit and had lots of problems so far. The unit was installed 3 months ago and the very first day it restarted 12 times. Real nightmare. And it was always from the first ray of sun and then randomly and intermittently during the day only. So, in 10 hrs daylight every day for over a week I had 10-12 restarts. But those restarts were around i0 seconds in interval. The power would go off and then the unit would powercycle and the power would get back on. I have fixed that by gelling the Infinisolar that I have a Power Generator connected. That did the trick for that issue. Then the fault F14 appeared. At first weekly, then every 2 weeks and now it has lasted 3 weeks. But , as you have mentioned the problem is that once ot goes down it does not powercycle back again. It could stay like that and beep and display F14 or the message is as in the subject of this thread you have started “ERROR 14 inverter dc component exceeds the allowable range”. We plan to go on a holiday in July and I am concerned that it just may stop working. I use SolarPower App to manage certain settings on the inverter> Please let me know if you can help me fix the issue. many thnks in advance Robert

Hi there, I have the same issue with InfiniSolr 15kw. And it is a pain as it does not power on itself automatically. I would be very happy to hear from you about the solution