Greg_SA

Regarding your batteries, did you run the right-hand pair of batteries linked together, and then that pair and the left one both to the fuse (i.e. two cables to the bottom of the fuse disconnect?

Thanks guys. I'll discuss with the installer to change to 230V.

My 12kw Sunsynk also died after about 3 weeks use. Only small loads. Supplier swopped it out.

Just wondering if you changed to 230V voltage output? I have the same scenario.

Hi, I have a 12kw 3ph Sunsynk inverter installed, and would like some advise from other users on the following: - Is your output voltage set at 220V/380V? My Eskom feed is normally around 235V per phase, so during load shedding, the inverter output drops to 220V, which I can notice on some appliances (such as the fans/turntable in our microwave). Are other users using the default 220V setting or changing it to 230V/400V? - I don't have the CTs installed, and the inverter doesn't show my daily, or monthly grid consumption (just says zero). Is that the reason? So I need to install the CTs? All my loads are on the inverter essentials, so I could probably install the CTs inside the inverter enclosure at the grid connection? Thanks, Greg

Thanks. The inverter feeds the entire DB, so the CTs could probably be installed at the inverter's grid supply?

Hi, I have a 12kW Sunsynk, and the installer never fitted the CTs (but I have them). Is it required? I see that under "Grid", my total for the day, month, year just says zero. Do I need to install the CTs to add that data? Thanks.