Miguelb

My settings are completely different for those 33 - eds 35 - 5 36 - 5 37 - 32d 38 - ena 39 - aen

My flot is already at 56.4, and it’s been more than one hour now and no change.. how do I set the equalization please and how do I increase the time?

What could be the issue in this case?

I have realized that the battery charges to 56v but the SOC goes only to 90%. Is that normal?

Sorry I see, yes so 13 is volt point back to battery and 27 is float. So maybe I should change 13 to 50v instead of 54?

Hey, what do you have for 13 and 27?

That’s just how they installed it… should that cable be connected? also the battery size seems to be fine considering my load at night is around 400w?

Battery is LBSA, 5 kwh, 53v. settings 29 - 44 27 - 54 26 - 56.4 13 - 54 12 - 47 11 - 20 a 2 - 20 a battery is switching off when reaching 52.5 v approx and is not switching back on in the morning. any ideas of what could be the issue?

Battery is LBSA, 5 kwh, 53v. settings 29 - 44 27 - 54 26 - 56.4 13 - 54 12 - 47 11 - 20 a 2 - 20 a battery is switching off when reaching 52.5 v approx and is not switching back on in the morning. any ideas of what could be the issue?

Hello friends, so I ended up changing the batteries, got a lithium one from LBSA. Got it installed yesterday and the power went off at 22:30! It was very frustrating since my consumption at 8:30 when I last check was at 200 watts! please help what can be the issue??

Hello friends, so I ended up changing the batteries, got a lithium one from LBSA. Got it installed yesterday and the power went off at 22:30! It was very frustrating since my consumption at 8:30 when I last check was at 200 watts! please help what can be the issue??

Thank you for the input, yesterday I had a fault code 72. I ended up disconnecting one of the inverters simce didn’t know what to do, the fault stopped. Of I only use 1 inverter, what settings should I use please?

I tried the settings you sent, made it worst… I ran out of power at 18:30…

Thank you for your willingness to help 🙏 this is the inverters specs. So what should I change for 26 and 27? I don’t have any software btw…