Miguelb

My settings are completely different for those 33 - eds 35 - 5 36 - 5 37 - 32d 38 - ena 39 - aen

My flot is already at 56.4, and it’s been more than one hour now and no change.. how do I set the equalization please and how do I increase the time?

What could be the issue in this case?

I have realized that the battery charges to 56v but the SOC goes only to 90%. Is that normal?

Sorry I see, yes so 13 is volt point back to battery and 27 is float. So maybe I should change 13 to 50v instead of 54?

Hey, what do you have for 13 and 27?

That’s just how they installed it… should that cable be connected? also the battery size seems to be fine considering my load at night is around 400w?

Battery is LBSA, 5 kwh, 53v. settings 29 - 44 27 - 54 26 - 56.4 13 - 54 12 - 47 11 - 20 a 2 - 20 a battery is switching off when reaching 52.5 v approx and is not switching back on in the morning. any ideas of what could be the issue?

Battery is LBSA, 5 kwh, 53v. settings 29 - 44 27 - 54 26 - 56.4 13 - 54 12 - 47 11 - 20 a 2 - 20 a battery is switching off when reaching 52.5 v approx and is not switching back on in the morning. any ideas of what could be the issue?

Hello friends, so I ended up changing the batteries, got a lithium one from LBSA. Got it installed yesterday and the power went off at 22:30! It was very frustrating since my consumption at 8:30 when I last check was at 200 watts! please help what can be the issue??

Hello friends, so I ended up changing the batteries, got a lithium one from LBSA. Got it installed yesterday and the power went off at 22:30! It was very frustrating since my consumption at 8:30 when I last check was at 200 watts! please help what can be the issue??

Thank you for the input, yesterday I had a fault code 72. I ended up disconnecting one of the inverters simce didn’t know what to do, the fault stopped. Of I only use 1 inverter, what settings should I use please?

I tried the settings you sent, made it worst… I ran out of power at 18:30…

Thank you for your willingness to help 🙏 this is the inverters specs. So what should I change for 26 and 27? I don’t have any software btw…

Please how do I change the float?? It seems like that’s the problem, batteries not charging 100%

But 2 weeks ago the batteries were fine, just when we sent the inverter for repairs we started having this issue..

Thank you! I’ll try to get all the info! batteries are providing 48v and are gettinf fully charged. what happened was that this guy said the slave Inverter was faulty and not providing output, only input. He sent it for repairs, when connected back we started having the issue of running out of power at 8 pm… 2 weeks ago we were running till 4 am, so I don’t think the batteries are the issue.. for the battery settings you asked, maybe you can send me what the correct settings should be? lastly, how do I check the firmware? thank you so much!

Hello everyone, I just moved into a farm fully off grid. We have 2 Mecer 5kva inverters and 8 gel batteries. My problem is that we were having energy normally until 2 am, but then a guy came and did something and now I’m running out of electricity at 8 pm! is there something I can do in the configuration to try to fix this?? What could be the problem? please help!

Hello everyone, I recently moved to a farm, it has a full off grid system. We are running on 2 mecer 5kva inverters and 8 gel batteries plus the solar panels. we are having an issue of running out of power around 8-9 pm. Please help me how to make it last longer?? Maybe can I change something in the settings?? thank you!!