chessmaster

My main dashboard for monitoring and smart switch controls with the obligotory RSA loadshedding and weather predictions. 😅

Some inverter stats on seperate pages

At least you have a straight forward implementation.
I am a fan of the minimal looks.
I do have a seperate sheet with detailed information
I use home assistant to keep track of camera's/alarms/solar and also starting with other home automation stuff with sonoff's and smart devices ( tv/aircon etc )
Some simple stuff like turning outside light on as sundown etc and then getting into more complex logic as well
 

Someone asked me a while back why I dont create a proper integration.
1. Time
2. I like teh modularity of Node Red. Can do changes quickly and I use it for other device hacking like camera's etc

Note for anyone else:
To check if Node Red is connected to Home Assistant ( ie long life token or other ) , under global context expand

Check your 2 x global configuration nodes. I dont think you have put in a long life token .
step 7 in : https://github.com/gdwaterworth/Home-Assistant---E-Linter-Logger---Sunsynk/wiki
 

If you are setting up v2 you must use only the v2 yaml's.

I'm seeing stuff from v1 still in the config as well.  The old mapping for slipx's card for one.
You might need to check your file and do a bit of clean up and reshuffeling. 
 
For instance you have template: setup in 2 locations

 

See below example e.g. if I where to add a second template: to my config in the wrong location.

Not sure if that was your full file but try the below structure and see if that might help.  Just to confirm you've setup your secret.yaml as well with the correct credentials?
config cleaned up.yaml.txt
 
 

I have been working on a version 2 which is a major rewrite
I have put a preview up under the "developement" branch on Git and it will be getting regular changes
There may be bugs ( probably will be )
The same flows are for region 1 and region 2
I dont recommend this for anyone yet who does not know nodered / homeassistant well
Basically changes are
Centralised Config Iteration of all plants and inverters All gathered data stored in the global context data area Selected data exported to major entities for flows/graphs etc. This data extract logic is easily and highly editable to cater for many scenarios. Slipx flow card entities changed to use the flow data. Means you can see exactly what you see in the sunsynk app.  
 

Random note:
Just a heads up as I was gifted this surprise this morning with my NodeRed not working anymore therefore no inverter data...
Turns out someghing in the auto-update from 14.5.0 to 14.6.1 didn't play nice.  Quick restore back to 14.5.0 and updating it again solved the problem.  Seems this is not an isolated incident.
https://www.reddit.com/r/homeassistant/comments/171q9t2/who_broke_node_red/
-------------------------------------
@chessmaster You should perhaps go look at the github page there was a major update in a version a while back we had to change the "yes" and "no" to true and false as the code was changed by @slipx.  I suspect this is your problem as you state you can see the data in the energy dashboard so it looks like everything is working properly its just not pulling to the card.

See release notes below:
https://github.com/slipx06/sunsynk-power-flow-card/releases/tag/2.0.0
You should also check your entity names as there was a breaking update for this as well.  See below:
https://github.com/slipx06/sunsynk-power-flow-card/releases/tag/v1.8.6
 
@Sc00bs you should perhaps just link that in your video as well as it looks like your video is still based on the old code using "yes" and "no" or perhaps you could do a updated video based on the new parameters 😉