Il_Biondo

Hi, yes i have removed the filters and the temperature drops to 50 degrees. Original filters do not allow air to pass through. In summer I leave it without filters, then before the next season I open it and blow it to clean it. Thank you

Thank you everyone, yes the 70 degrees are Celsius. The ambient temperature is now around 30 degrees Celsius. The inverter is new, in use for 2 days. I was used to lower temperatures with the previous Axpert Max at 24V (max 3.6Kw). My concern is that these temperatures might be due to a firmware bug where the fan control is not working properly (this one is much quieter compared to the previous Max at 24V).

Good morning everyone, a couple of days ago I installed an Axpert Max 8kw inverter purchased from SolarPower24 in Italy. The inverter has firmware 72.07, but I notice that the temperature remains high even without loads or production, and the fans always run very slowly (I had a Max 3.6kw and the fans ran very fast, always keeping the temperature low). The temperature stays around 70 degrees at rest, but if the production starts and is high, the fans turn on and the inverter's temperature decreases. Is this normal behavior? Could it be a problem with this firmware? Thanks.

Hi, when will AN epever tracer regulators be supported? There are many of us who use them and it would be great to integrate them into solar assistant. Thank you