sarzyk

Hi. Maybe someone know that HinaESS PowerGem Plus 14,3kW can integrate with Home Assistant via RS485 or CAN? Thanks

In my information inside is something working on pylon protocol

I try A in these port to A in converter and B to B in converter. Other version of software I can connect but only see some features and cell parameters

Hi. I have 5 x V-TAC VT48200B battery. This is the same like Vestwoods and Narada. When I connect batteries via can to 2x deye 12kW inverter I get only 300A charge and discharge. I get information about that I should change how many battery is in one stack. I have UIWare software for that but my converter rs485 to USB not connecting the batteries with PC. Maybe someone can help me how to connect batteries with PC? Maybe some specific address of dip switch? Thanks

Thx for replying. 300A is max from 5 batteries (it depends from BMS). Each inverter can discharge 160A for these moment.

Hi I have 2 paralel dey 12kW hybrid inverters. Also I have 5x V-TAC VT48200B (Vestwood). My common problem is if I need to charge and discharge batteries with 480A BMS give only 300A. I tried cha get cable, address in battery nothing works 😭 Can someone help. If I change to V steering it works. I need SOC mode.

Hello everyone. I wonder if there is a chance to control the "Smart Load" output from Home Assistant. I would like to automate it so that when the water in the hot water tank is heated to a set temperature, the "smart load" output is turned off.