Jump to content

Leonvd1983

Members
  • Posts

    14
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

Leonvd1983's Achievements

  1. Hi everyone i have 2 x kodak og5.6 inverters setup in parallel with 3x Hubble 5kWh Batteries Why would the PV input graph look so irregular every single day ? when Both inverters are on the display bottom line seems to display blank line.
  2. the ac icon does flash for maybe 2 seconds then go stable then i hear the click from relay i suppose then the generator stalls out.
  3. ok my generator is not connected to any load, nou ac cable connected to output side of my inverter. I basically have the invert connected to the generator and then to the batteries. the generator wil start up and takes maybe 5 seconds then it kicks off?
  4. where can i find firmware for Axpert range of inverters ?
  5. Hi All i need help, none of the solar installers or Generator Suppliers seems to be able to solve my problem. I have tried with the Axpert MKS / MKS II / Axpert King and Recently the Axpert Infini VIII inverters all fully offgrid. No AC input from Eskom. only solar panels and Generator They are connected to a bank of Pylontech us2000b Batteries and i have a 6kw Diesel Generator from Bundu Power connected with some kind of small AC filter fitted I need the Generator to just charge or top up my Pylontech Batteries during rainy day`s but when the generator is started i can see the inverter detecting the AC input from the generator at 49-50hz 230-240v. As soon as the inverter starts to use the generator to charge batteries or to bypass (without any load in the inverter form AC Side) the generator will just stop within a few seconds (almost seems like it trips out. I then have to switch of the generator and back on the be able to start it up again.) The only inverter that i have been able to use that works fine was a small 4kw Axpert 105v mppt inverter wich seems just fine with it but it is to small to use my generator to its full potential as i can only get at most 2500w out of it for charging the batteries. I have tried the APL and UPS setting on inverters. I have set the max Charge to 2A as a test Nothing help. what could be wrong ?
  6. hi they are showing HA and SL yes firmware is 72.61? setting 29 i set as low as 45 but no luck ?
  7. Good day i need help. I have a setup of 2 Axpert Inverters 1x Mks 5M Model and 1x MKS 4p Model with 5x Pylontech US200Bplus Batteries. During Daytime the system will run Perfectly Fine on Solar and Battery but every night at around 19:00 when the batteries reach 70% or so the whole system will bypass to Grid until morning when Solar Panel start Charging. I have tried to lower to the Back to Grid Voltage to as low as 45v just to see if at least the batteries would be used unitl 10% SOC but no matter what i do the inverters change back to grid ? What am i missing here ?
  8. Hi i have 12x us2000b batteries in use with 2x Axpert 5kw inverters. Can anyone here please help me to get idea if my batteries working optimally. Will the usage during night with the load in graph drain the batteries to 20-30%. Cant seem to find place in Emoncms that give total battery KWh used say from 16:00 to -7:00 ? Batteries charge to 100% at around 14:00 Thanks
  9. Hi I need help I cant seem to get my Axpert inverter to use generator power to charge batteries while using available solar and battery power to run the Load. What settings need to be set ?
  10. Thank you for your help will try and let you know if it worked
  11. Hi I need help. I have 5x 5KW Axpert Offgrid Inverters connected in Parallel. (sol-ix-5-m) I don't have any Eskom Power connected but instead I have a Ryobi 7KVA Petrol Generator with built in AVR. When I connect the generator to the inverters and let it run the Inverters will kick in the generator load and the in 1 second kick off and back to Solar / Battery. sometimes it will trip some trip switches. I had the AVR on Ryobi Changed to a Firman One as I believe they are better. I connect a 3KVA Tradepower Inverter generator and it will work fine but this is too small. Why do the inverters refuse to accept the power from my Ryobi generator but ok with the Tradepower. I have tried another type of generator (Honda 8kw) and this also will not kick in same result. I basically need the Ryobi to only charge the battery while the inverters use load from batteries when solar not available but no load from generator. What am I doing wrong.
  12. Hi I need help. I have 5x 5KW Axpert Offgrid Inverters connected in Parallel. (sol-ix-5-m) I don't have any Eskom Power connected but instead I have a Ryobi 7KVA Petrol Generator with built in AVR. When I connect the generator to the inverters and let it run the Inverters will kick in the generator load and the in 1 second kick off and back to Solar / Battery. sometimes it will trip some trip switches. I had the AVR on Ryobi Changed to a Firman One as I believe they are better. I connect a 3KVA Tradepower Inverter generator and it will work fine but this is too small. Why do the inverters refuse to accept the power from my Ryobi generator but ok with the Tradepower. I have tried another type of generator (Honda 8kw) and this also will not kick in same result. I basically need the Ryobi to only charge the battery while the inverters use load from batteries when solar not available but no load from generator. What am I doing wrong.
×
×
  • Create New...