-
Is it possible to raise the high dc cut off on this inverter,when i eqaulise my batteries my inverter cuts out with high dc warning,because it cuts out at 60v and eqaulise are at 64volt
-
After i adjusted the bulk to float at 2hours and go to float if charge lower than 3amps its makes a huge difference,thanks very much
-
I have a 60 amp microcare mppt,it only has a bulk and float charge setting,i have the charge settings to data sheet,at 3pm it goes to float charge and i check the soc of the batteries and its not near fully charged but floats at 1.2 amps,the soc only goes to green after equalising batteries
-
What are the correct charging setting for t105 trojan for offgrid