Cyclic

Why does the battery placard say 100ah yet the FCC is reading 105.1ah in the first picture??

Hi, Im having a problem, I have 3 Svolt 48v 4.8kwh 15 cell batteries in parallel, the primary battery(dip set to 1 on) is all of a sudden over charging and tripping it's CB's at around 53.2 volts and not 100%, individual cells are reading 3.330v, When this happens the other 2 batteries are reading 49.7 volts and discharging. Have I set somewhere the wrong settings on the BMS TOOL as these batteries use a Pace BMS

I need this cable please supply me with contact details

Hi Guys, Someone posted a wiring diagram of a rj11 to a rs232 plug, for Pace BMS Monitoring, For the life of me I cannot find it again, Please pass on if you have it Much appreciated

Set to Lithium, wonder if in the battery BMS its set to 51.7v

Can you please send me a pic of the rs485 cables between the 3 batteries, My setup of 2 sna6 inverters in parallel doesn't seem to be getting the correct battery information My batteries are svolt 4.8kwh 15 cell and not charging to 54volts only reaching 51.7 - 52 volts

Very strange, on the battery they show me 52v @ 100% yet the BMS is logging a OVP!!

99% Charge as we speak, #1: 50.24v DSC message #2: 50.24v DSC Message #3: 50.54v OVP Message

I have 3 of these batteries in parallel with 2 luxpower sna6000wnp inverters, But I see there is around 60 events of OVP!! The inverters are set as Pylon, Why would this be so much in 3 weeks of operation?

I have 3 of these batteries in parallel with 2 luxpower sna6000wnp inverters, But I see there is around 60 events of OVP!! The inverters are set as Pylon, Why would this be so much in 3 weeks of operation?

I have 3 x 48v 4.8Kwh/100Ah Svolt lithium batteries in parallel, The manual recommends 50A charge current a battery and a max continues discharge current of 100A, Therefore what do I set on the Inverter App(Luxpower) as the Charge Current Limit(Adc) and the Discharge Current Limit(Adc)?? My system: Inverters are 2 x SNA6000 in parallel with 18 x 560w panels

How do I set my Luxpower sna6000 for grid low voltage, I'm running two in parallel Had a huge lighting storm in Pretoria Eskom went down and returned few hours later at 139Vac for almost a day

How do I set my Luxpower sna6000 for grid low voltage, I'm running two in parallel Had a huge lighting storm in Pretoria Eskom went down and returned few hours later at 139Vac for almost a day