Hlokohloko

Good morning @TaliaB I came across your response on this topic. when you say "Double-check that the "Limit export power" setting is enabled on both inverters and that "Meter type" is set to "CT" on the master only." Where / How do I get to the "Limit export power" setting on my Deye Inverter? I am also interested to set my "Meter Type" to CT? I'm unable to find these settings on my Deye 8Kw Inverter? Please assist in directing me how to get to these settings? I have 2 x 8Kw Inverters connected in Parallel. Will appreciate hearing from you?

Good evening I'm based in Pretoria, South Africa This issue is repeating after new Firmware has been installed. The System did work correctly initially after the firmware update, just briefly (Three or Four Days) Please assist me with my two 8Kw Deye Inverters (connected in Parallel), 5 x 5Kw Volta Batteries, Since three weeks ago, my Inverters seem to be using Grid Power even when there is Solar / Battery power available? Sometimes the inverters stop Solar production just to use the Grid. I am used to waking up with my battery at 35%, now I wake up with my battery at between 50% and 60%, because it was using the grid power first during the night. My system does NOT prioritize solar / battery power anymore. When I physically look at the Inverters, it is the inverter that is connected as the Slave that is drawing from the grid. What I have seen to resolve this issue (temporarily), when I restart both Inverters, the system works correctly for about a day or so and then do the same error again (drawing from the grid first). See attached below 2 x pictures / screenshots + a short Video. My settings :- This is during the day, when there's ample sunshine I've selected Load First on my settings. Zero export to load. Time of use is activated, is as per the attached. I've even tried lowering all the percentages to 35%, at all time intervals it did not work I've tried selecting Grid peak shaving to 1000W, but that did not work.