WelshDragon80

Changed cable and no issue Happy days

No roof that's the scaffolding as I only had it installed 2 days ago.. I will be building something like this around it

Yes the 7k eco is an upgraded 5k, so has mostly the same configuration of terminals.
Just tested the terminals on mine and do not find any 12v output.

alligator clips come to mind 🤣🤪

That does suck as could done it my self, as the wife does not want me or trust me more like to connect it to the battery terminals inside the invter 😅😅

Not sure of your model, but my 12kW Sunsynk inverter has a 12V connection (Pins 11 and 12) that should be just what you need - just confirm in your user/installation manual...
See screenshot from my manual below. Hope this helps 🙂

Impossible to connect any wiring if the service panel is not opened . No seal to monitor for warranty. AFAIK all inverters you have to open something in order to connect wiring

Has anyone placed there rasberry pi insdie there invter to power it?
If so have few questions.

Where have you connected the pi to power.. did you connect it to battery terminal or did you find a 5v rail?

How have you secured it insdei the invter?

Does it invalidated your warrenty doing it his way?
Do you have any pictures of such.

As I have just had my install done but it is all outside and only way is to place the pi inside the invter and find a power rail / use battery rail to power it using a buck convter .
Many thanks for looking and your replies.

Yes I have something similar to that a buck convter.

So does it connext to where the battery connects to in the invter or to the battery itself?