Leee

Good Day - Has anyone paired a 6Kwatt Luxpower Inverter to a Hubble AM2 5.5 Kw 100 Ah battery and got the inverter to display the 100Ah. I have two AM2 hubbles and the inverter is only displaying 50Ah - most of Hubble and Luxpower brain pool don't have an answer for this problem. So what do I do - sell either the battries or the inverter and find a match, Its inportant for me to know my battery ststus before going out or to be at night. What pairing should I use ?

Has anyone have a system like this up and running - I am worried my battries might be duds ?

Good Day - I have a nice problem to solve and need your help. I have a 6KW Luxpower inverter which is supplied by two AM2 Hubble 5,5Kw battries. The data cable between inverter and battries is supplied by hubble. The master battery switch is set; number one on, The slave battery is set number two switch on. Now my problem is; the luxpower app onlyshows 50Ah and not 200 Ah. Each battery is rated at 100Ah. Anyone come accross this proble and how do you resolve this,

Thanks for the reply, the inverter is a Synapse 3.0+, the invoice has it 2.4Kw hybrid solar invert 24V - 1000w mppt There are 4x 380w canadian Solar mono half cell module on the roof. 6mm cable was use in the installation. What you say about heat may be the root cause, I have not heard the fans for a while. I have opened the unit and both fans have been replaced with new ones but still not comming on, have left the inverter open to remove heat, was fairly hot.

My setup is; 4x385W panels on the roof in paralle; a Synapse 2.4Kw inverter and 2 AM4 Hubble batteries 24v in paralle. I have added a Hubble Riot monitering device via the cloud all is looking good BUT... when the voltage drops below 24 volts the alarm comes on and stays on for untill the AC picksup or the Sun starts to charge the battery. Alarm can run for more than an hour. Today we have a very sunny day and I expected to see the solar pannels driving up the battries but a lass, The Pannels seem to switch off and back on according to the monitor. I'll try and add a graph to show the switching, I want to add a third battery but if the inverter is dumping load then I will be wasting my resourses. Remember is this peach of a day no clouds, so why is the pannels dumping the load/switching off. Anyone with take on my issue.