Jump to content

Computers, Hardware, Software & Peripherals

  1. How do you setup the WiFi module on the Axpert 8kw to be able to use the WatchPower App on an android phone. I have tried numerous times to set it up but cannot do so. I get to a certain section where it tries to confirm the WiFi module and it goes to the diagnosis screen. I am also having a problem trying to register my PN on the WatchPower App. Any help will really, really be appreciated

  2. Does anyone know what happened to the LuxPower App on Google PlayStore. It seems to have disappeared. A client lost his phone and is trying to re-install the App, but its gone!

    • 4 replies
    • 2.1k views
  3. Hi My ICC Monitoring stopped a month or so ago. Emails and calls go unanswered. Anybody know if they are still in business? Their web site is still active.... Thanks

  4. Hi everone, is there a fix for the solarman notifications SMS enablement, as I see only China's country code can be selected? Or is the a subscription to enable it? Thank you in advance.

  5. Started by H.khalif,

    Hello guys I want to ask how can copy firmware version from one inverter to another for same model VMIV TWIN6KW? Because I need old version back ?

  6. Started by Jasey,

    Since having built a stand alone building next to the main house, every single time lightning strikes in the area, the earth leakage trips at the new building's DB (the new DB is fed from the main house, which is unaffected by any lighting strikes). This has been ongoing for the past 8 years and happens ONLY when lightning strikes. Is there a possible solution for this? I'm considering installing a double pole surge arrester in the DB, but not sure if this will solve the problem. Any ideas?

  7. Started by Bushkey,

    Good day. I have a huge issue getting my Luxpower app going. I went through all the hoops and loops. From downloading the app, registering, getting the installers code to installing the dongle onto my inverter. But I am pretty much stuck here. I connect via WIFI to BA41900.... which is my dongle. I then enter 10.10.10.1 into my browser. Sometimes it just hangs there, other times it gives me the option to enter a username and password. I then enter as per instructions the username admin and password admin. Sometimes nothing happens, other times it takes me to some sort of a web site where I am supposed to select the option station mode setting. This is the furthest I have …

    • 2 replies
    • 195 views
  8. Hello Victron Cerbo GX Firmware version v3.53. The time cannot be set, it restarts and shows 10 hours more than the real time. Thus, it cannot measure real consumption and production. Can someone help me, tell me what could be the reason for this? Thank you in advance

    • 1 reply
    • 199 views
  9. Started by TecNick,

    Dear all, today is my first das in this forum, my englisch is bad and I'v no experience with reneable energy - need to learn. Yesterday I had success with com via RS232 with my Pylontech Battery Stack H48050 Powercube using Aten USB/RJE45 adaptor with selfmade cable. Now I need the preferred Management Software. What would you recommend and why? Can you please give me the link, too? Many Thanks

  10. Introduction to Relay Tripping Curves-PRO2_Ver2.pdf

  11. Started by Screech,

    I have understood from a post on this forum that Manie from ICC Software has passed. As a long time user of ISC I am wondering if any one knows what will happen with the software now? I have tried Solar Assistant in the past but like ICM more. I am afraid that if no more developments are taking place on ICM I will be forced to move to Solar Assistant. Any other users of ICM ? What are your next step or recommendation regarding ICM Regards, Screech

  12. Started by ahmad almawal,

    I want the latest software for Growatt 5000 es inverter

  13. I read the CAN data of my Enertec MegaTank GL48100 with my own ESP32 software and draw the charging curve as per https://off-grid-garage.com/battery-data/ with the software on https://off-grid-garage.com/measurement-tools-and-analisers/ and found it does not look like a good LiFePO4 charging curve at all – there is practically no time for balancing and absorption. Then I saw on Enertec website “You can use the “25T or 15T” software” to configure the battery https://enertec.co.za/couch/uploads/file/user-manuals/en230728-gl-t-how-to-make-gl48100-communicate-with-different-inverter-v1-031.pdf After a big fight with Enertec they still do not want to supply me with the in…

    • 0 replies
    • 214 views
  14. Started by TheOracle,

    Can someone please let me know where can I get the latest firmware for my Pylontech US3000C battery?

  15. Hi community My inverter outputs a pure sine wave ( or so it says) . My motherboard has packed in so I'm wondering if the solar power has caused this , other than normal wear and tear. Would it be a safer bet to use a UPS to regulate the voltage or is there a better way ?

  16. Started by guyi9000,

    Hi guys, any link or store for where i can purchase deye parts? Long story short i have a deye 8kw inverter and the wifi logger stopped working. Bought another stuckman lsw-3 and it also doesnt work. My next attempt is to buy the little board it connects to. Any advice? Imaged attached. It is referred to as wifi plug v1.2

  17. Started by Wanda,

    Hello Everyone Is it possible that an inverter firmware update can solve error 51 on a Kodak OG5.48 inverter. Thank you.

  18. Started by Pieter007,

    hi can someone design for use friendly dashboards like icc for me -i am using sunsynk and pylontech- will pay for the services. regards P

  19. My laptop recently went into hospital for a format. I tried installing the efergy app (eLink) but I am having trouble. The app requires Adobe Air, which is no longer supported. The SDK is available, which I have downloaded, but I do not know how to install it or point the program to the right bits. Google seems to focus on IT gurus. I contacted Efergy who's response was "You can download a SDK version of this item (https://airsdk.harman.com/download) and you can download and install after you accept the terms and conditions." Download complete, but how to install? No .exe in the root folder or the install folder. I have just moved into a new place and in…

  20. Started by Tim003,

    Hi all, I have SRNE MPPT and want to configure the settings on the PC application but cannot find the download link. If anyone is using it please assist. Thanks.

    • 8 replies
    • 2.3k views
  21. Hiya, i'm new here; wanted to download some protocol docs but since i'm here, i thought i'd share my project here: https://github.com/HotNoob/InverterModBusToMQTT i started this to get my own inverters setup with monitoring via webui, but because i couldnt find an acceptable / working solution for my inverters... so, i just wrote this. now, since 99.9% of the inverters basically all share the same hardware, they also share the same underlying protocol. So, if your inverter has a USB-B port, it is running ModBus over Serial, and can be monitored using this project. The script / software has been written so that anyone can add a protocol; and i…

    • 0 replies
    • 426 views
  22. Started by Nobby,

    I have just completed a reference site for my Solar System using SolarAssistant a Growatt SPH5000 inverter, Growatt GBL6532 6.5kWh Battery, iBoost and EPS connections. It may be of use to anyone with a similar system setup or is thinking of adding to an existing installation. http://www.brettoliver.org.uk/Solar_Power/Solar_Power.htm

    • 0 replies
    • 538 views
  23. Hi All So I am upgrading from Lead Acid to Li-ion and thought I might as well also do the firmware. I have an RCT Axpert 5KVA VM3 inverter I never received the illusive communication cable in the box and at the time did not really think to much about it. It was an insurance replacement. TLDR; this cable is what I need Following the various forums here and reading quite a bit, I saw that I can update the firmware via the downloaded firmware I got from Coulomb's link. Everything connected fine and seemed okay via USB and then it errored out and I got error message 32 which is a communication error between display and inverter and to rectify this you n…

  24. Started by Gary W,

    Good day. I have my data logger connected via a WiFi extender. My issue is if I disconnect my router of my extender even for a short period then my logger won't reconnect. I then need to reconnect to the same SSID using the same password even if it shows connected. Any help or advice please.

    • 0 replies
    • 465 views
  25. Started by ChrisDHorner,

    SUBJECT: Growatt Proxy Programme to capture data from a Growatt Shine WiFi-X module then forward the data on to the Growatt Online Server (https://server.growatt.com). INSTALLATION: 10 x AKCOME MONO 450W SOLAR PANELS; GROWATT MIN 2500-6000TL-XH INVERTER; GROWATT SHINE WIFI-X HELP PLEASE: Has anyone got a Growatt Proxy Programme that will work as a proxy on a Windows 10 PC/Laptop to collect the Growatt diverted data, then forward the date on to the Growatt Online Server as normal? There seems to be an online Grott proxy programme (see link below) but I don't understand how to download, install and configure it. Are there any other proxy programmes …

    • 4 replies
    • 1.3k views