Lurcher

Thanks guts for this reply. It seems like the only way to go. Thankyou

Hi Guys, Thanks for this good information, its exactly what I need as I am installing an Earth Leakage on the output of my inverter at present. My question is: how do I correctly identify the neutral wires for the circuits currently connected to the inverter loads. My DB is a challenging mess and all the neutrals are attached to a common neutral bar. I need to accurately identify each of them and re-connect via the new Earth Leakage on their own neutral bar. Any bright ideas? Thanks

Grateful thanks to all who replied. I will have a crack at the at the wifi first and let you know. The challenge I face is that the wifi was previously connected to a router that has been disconnected. I also believe that the firmware update is only supported on PC, not MAC so I'll need to get around that one. Thanks guys..! Roger

Hi All, I have lurked around on this forum for a while and really learned that the more I learn the less I know. I have a Goodwe ES that was installed by some village idiots about 5 years ago and it has performed okay. I now need advise or assistance to firstly wifi connect (I have no control at the mo) and then to check the condition of the system. I would like to know of and recommended installers who know the Goodwe well and could could help me. I would appreciate professional or amateur help and am not looking for a freebie in either case. If you guys know of someone I would appreciate the contact details or your help. At this point I mostly need help with wifi connection and quite possibly a firmware upgrade. The system in in Bryanston Jhb. Many thanks,