Barry Williams

Good afternoon All I am looking to make contact with anyone who has experience with Victron & Dyness. My system seems to have communications problems although the cable used is that specified for Victron. My system only sees the storage capacity of the 9.6kWh Powerbox as 50Ah rather than 200Ah. It also does not show any of the details from within the batteries. This shot is from a site with 2 x B4874 batteries in parallel but the capacity is incorrect.

Thanks Mike, much appreciated

Mike, good morning i have just installed a Victron Easysolar 5kVA, 12 x 335W panels and a Dyness 9.6kWh power box. I am having an issue with the battery monitor in the colour control. When i use the Dyness battery monitor the power going to and from the battery is very low (eg Grid 1023W AC loads 750W and batteries 15W). If i change to the Victron battery monitor the figures are more realistic looking ie power in almost equals sum of power to loads and batteries. Are you able to offer some assistance in the setup of the batteries and associated Victron parameters? Thanks