TrevorH

Thank you I will check with the installers. The only info I have is that it is a 100ah 48v Leoch Battery.

Hi there I hope someone can help. I have hijacked my husband's profile as he is away. I have a Mecer (Axpert) 5kva inverter but have just upgraded to a 100a/h lithium battery. No solar at the moment. I just need some advice about settings on the inverter. I added a screenshot of my settings as the installer wasn't 100 percent sure what to change. Do I need to make any changes? Any help would be greatly appreciated. Linda

Hi There, I have just moved into a new house that has an inverter already installed. I was wondering if someone could give me some advice. I have been away for a week and my batteries keep discharging and the inverter is switching off after only a few hours of no utility power. Are there changes I can make to the setting for the batteries to last longer. Currently the setup is I have a Mecer 5Kva inverter SOL-I-AX-5P 4 x Vision 100a/h AMG batteries 30A There are currently no solar panels. Also when they utility power does return the batteries seem to charge rather quickly. Thank you Linda

Thanks got the info. One question as soon as I change from parallel to single I have an earth leakage trip. But when I am in parallel it works fine. I must add that I don't have my whole house connected to the inverter. My pool, borehole and geyser are connected only to utility.

Thanks for the feedback. Busy adjusting settings at the moment.

Good Afternoon Sorry to just drop in but I am hoping someone can help me I have just started with my solar journey and unfortunately my panels were delivered just before SA was locked down for the Covid19 virus so I am trying to set it all up myself. I just want to make sure that my settings are set up correctly I want to run solar first then utility and leave by batteries for backup power, I have a Mecer 5Kva inverter SOL-I-AX-5P 4 x Vision 100a/h AMG batteries 30A 6 x 340w solar panels (2 sets of 3 in series connected in parallel) Here are my current setting I just want to make sure that I have it all setup correctly. Do I need to change anything to extend my battery life or anything else they may be incorrect Thank you

Good Afternoon Sorry to just drop in here but I am hoping someone can help me I have just started with my solar journey and unfortunately my panels were delivered just before SA was locked down for the Covid19 virus so I am trying to set it all up myself. I just want to make sure that my settings are set up correctly I want to run solar first then utility and leave by batteries for backup power, I have a Mecer 5Kva inverter SOL-I-AX-5P 4 x Vision 100a/h AMG batteries 30A 6 x 340w solar panels (2 sets of 3 in series connected in parallel) Here are my current setting I just want to make sure that I have it all setup correctly. Do I need to change anything to extend my battery life or anything else they may be incorrect Thank you