Hennie Lange
Members
-
Joined
-
Last visited
-
The Kodak inverter worked fine and the the screen started flashing on and off, and eventually just switched off. Screen dead. I could not get it to start again. The Inverter is setup with user defined settings for the Revov 11.2KW battery. It has a 200A fuse isolator on the battery cables between the battery and inverter. Any suggestions as to what can be wrong? According to the manual it could be that the inverter does not sense the battery supply, ie voltage too low or some other problem. The battery is fully charged.
-
Hennie Lange joined the community
-
Hi, wonder if you can help. I have an Axpert 5KW 48V inverter with with 9 x 270W PV connected in an array of 3strings with 3 panels in each string. I measured each string, got 107V with 7~8A per string. But measuring the leads connected to the inverter there is 107V. But the Amps reading on the inverter is intermittent, jumping from 0A to 6A. Can you shed some light on this. Not sure what other tests I can do. It almost looks like there might be a problem with the Inverter PV controller. Pleas advise.
