Charlesk

There is a com link between battery and inverter. Should it not start up when mains or pv is availible again. Thanks

Good Day, I would like to get some information regarding the Kodak King start-up after the Low battery voltage has been reach. The inverter is connected to the grid and PV array with two 3.5 Kw Pylontech batteries. In this scenario the mains failed and the inverter took over in battery mode until the low cut off was reached(this was at night so no pv) , the inverter batteries switched off as expected. The next morning the mains came back and PV was available but the inverter stayed off until it was manually resettled. Is the anything that can be changed to do an auto start-up when one of the supplies comes back ? Thanks Charles

Correct

Sorry, i did not set it out clearly. 4 strings of 3 pannels each, so 120 v at +- 36bamp

Hi, 320 w panels 4 sets of 3. Fused and with dc breaker, yes they worked before in just swaped the inverter out this weekend my previous one was just an inverter charger.

Hi, No the pv icon is not on and the pv voltage is 0. The pannels have been on my previous inverter and was working fine. 4 sets of 3 pannels 320w pannels Each set is 120 v

Has anybody had an issue with kodak king inverter not picking up the pv array. Watchpower said that pv loss. Thanks

Good day. I have a 8kw sunsynk inverter, 16x320 pannels and 2x3.5 kw batteries. The db has been split into separate neutrals. The issue i have is that the main db earth leakage trips as soon as the main power is cut(load shedding). Any idees?

Good day I want to set up. My sunsynk to use pv first then battery then grid for loads and to charge the battery. Will this settings work to accomplish this?