Did the one inverter just trip and reset or did you switch it off?

 

It started off with a communication problem on the WiFi card, then the BMS485 port through which I am monitoring the system, then the entire inverter just stopped working. No error codes or anything. Just switched off. Happened while we were on holiday so the system carried on working at 50% capacity for about 4 or 5 days. When I got back, I removed the master and tooki it in to Sunsynk for repair. (Still there). Replaced the master with loan unit for the time being.

My email is [email protected] please let me know the outcome of your repair experience.

Mine was not a good experience and had to be escalated to Sunsynk UK.

 

@Andre Burger - you must be completely out of your mind to do all this on your own. Well done. 🙂

Official update on Freedom Won Lite 52V home batteries. You don’t need additional fuse or fuse breaker. 
This is already built into the battery.

This means on my two 15/12 connecting into the Sunsynk 3phase I will have the four 50mm2 positive cables coming to the busbar ( 2 from each battery) and the a 95mm2 going to the inverter.

I struggled to get a 150mm x 50mm - 6mm thick copper bar to put all the connections on .

I will post the picture when it is complete with both inverters running.

 

On 2023/01/17 at 12:52 PM, Tushar said:

@Andre Burger - you must be completely out of your mind to do all this on your own. Well done. 🙂

You're not the first person who say that....🥴

How long did it take to get the inverter fixed. Mine has broken a second time with the battery comms port coming off the pv board.

Colin, it took about 4 weeks. Still waiting for the repair report to know what they have had to do.

 

Ok exactly the same response and time period that I had.

I have attached the manufacturer’s info Deye if it helps anyone