February 4, 20197 yr Hi, i'm looking for firmware for axpert MKS 3000 (non plus version, MPPT only 600W). Does anybody know where to get it? Thanks Dumi
February 4, 20197 yr 53 minutes ago, Dumi said: Does anybody know where to get it? Usual story: apart from a handful of cases, you can only get the appropriate firmware update file from the manufacturer, via your reseller, sending them the serial number. As far as I know, your case isn't one of the handful where they are available elsewhere.
February 4, 20197 yr Author 10 minutes ago, Coulomb said: Usual story: apart from a handful of cases, you can only get the appropriate firmware update file from the manufacturer, via your reseller, sending them the serial number. As far as I know, your case isn't one of the handful where they are available elsewhere. Thanks for your answer. I bought Axpert from second hand, from another user. So i don't know reseler. I send email to Voltronic power, but wihtou reply :-(, maybe i have bad address.
October 29, 20214 yr Coulomb - You and me both. My fans don't want to switch off after certain amout of battery drain and fully charged again. Have to kill the incomming ac and back on again and fans go off. If the battery drain is less than 25% then the fans work normally. WEIRD Anyone had any luck getting firmware ? I see the 5kva ones are easily found.
October 31, 20214 yr On 2021/10/30 at 5:05 AM, DaveCT said: Anyone had any luck getting firmware ? What is the existing firmware for this model? I have 18.22, probably quite old, but it might be newer than what you have, if it's suitable.
June 3, 20233 yr I have installed a different 48v firmware in a 24v axpert please can someone send me a 24v firmware for a 3KVA MPPT?
June 3, 20233 yr 5 hours ago, oblitum said: can someone send me a 24v firmware for a 3KVA MPPT? There are many models that fit that description: PF1 versus PF0.8, plus versus not, DSP processor versus Freescale processor. What was the original firmware version, if you can remember? Edit: failing that, was is it running now, and what are the problems? Edited June 4, 20233 yr by Coulomb
June 4, 20233 yr These images are from before loading the wrong firmware. I have only modified the main cpu. Now even if I load another s19 file correctly, it still shows the same firmware version, why?
June 5, 20233 yr 12 hours ago, oblitum said: These images are from before loading the wrong firmware. Unfortunately, my lower power firmware collection is woefully incomplete; I have no 06.xx firmware at all. So I can't help with updates or analysing what it's doing. 12 hours ago, oblitum said: Now even if I load another s19 file correctly, it still shows the same firmware version, why? That's very strange. I can't explain it.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.