Jump to content

oblitum

Members
  • Posts

    7
  • Joined

  • Last visited

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

oblitum's Achievements

  1. that something so small can cause too much catastrophe. If you ever come to Spain, I have a duty to invite you to a big lunch. very grateful for your generosity
  2. Thank you very much for answering, I was looking at a post of yours from some time ago where you schematized that chain of resistors in a similar problem. I have done readings and the 1004 resistors give readings of 1 megaomnh except for the one under that rubbery block, I am going to replace the resistor now and try, I will give you answers in a while. thank you very much for leading the way
  3. This is a 24v axpert inverter with an error 56, testing with a laboratory account and batteries, the error is persistent, the reading on the voltage display is incorrect, marking 1.4v and it goes up and down randomly. Could it be the voltage sensor? apparently nothing burned inside not even a burning smell. I'm open to suggestions to save it from the garbage
  4. looking for a solution for my vmii inverter with error 56 I found this channel that shares repair videos exclusively from voltronic axpert, it is very interesting and maybe it can help the guys in this forum. https://www.youtube.com/@solarcosenergiasrenovables5152
  5. These images are from before loading the wrong firmware. I have only modified the main cpu. Now even if I load another s19 file correctly, it still shows the same firmware version, why?
  6. I have installed a different 48v firmware in a 24v axpert please can someone send me a 24v firmware for a 3KVA MPPT?
  7. I have bought a zeus 3.0 wind turbine, it has already arrived, although I am still building the 15 meter turret. Does anyone have references to this Tesup model? I hope it is not as bad as the one discussed here. As the tower and the cabin will be 60 meters away, I have thought about joining it with a 10mm2 cable. Is it too much? On the charge controller, will it hold 12 units of 2v and 900ah c100 with a battery bank? looks flimsy. my current inverter is a hybrid axpert and 1.5kw on plates, this is only for cloudy days my location is in Chipiona (Spain)
×
×
  • Create New...