July 21Jul 21 Hey all, I recently had a warranty replacement of a US3000C and received the US3000D module. Unfortunately the ICM software which was still working for me for years is now struggling to gather BMS data for my stack from the US3000D which is my new master unit. I was just wondering if anyone has an updated firmware for this unit? I have noticed the firmware console commands does not include all commands from previous generations. It does have the new charging voltages, etc as per the last firmware update for the US3000C. I also noticed it has board NF4.E3 which is different to some of my US3000C modules with board NF4.E2 I executed some familiar commands from the console. Some commands did not work, so it seems the firmware has not implemented previous commands. BatteryView v3.0.24/28/37 does not show scaned data even on its UI, only command line interaction worked to some degree. Not sure if there is a later version of BatteryView that caters for this US3000D. pylon_debug>infoinfo@Manufacturer : PylonDevice name : US3000DBoard version :Board : NF4.E3Main Soft version : B1.4.0.0Soft version : V1.1Boot version : V0.02Comm version : V2.0Release Date : 25-11-13Barcode : (I removed my barcode for obvious reasons)Specification : 48V/74AHCell Number : 15Max Dischg Curr : -70000mAMax Charge Curr : 70000mAEPONPort rate : 1200Console Port rate : 115200Command completed successfully$$pylon_debug>pwrsyspwrsys@ Recommend chg voltage : 52800 mV Recommend dsg voltage : 45000 mV Recommend chg current : 15000 mA Recommend dsg current : -37000 mACommand completed successfully$$pylon_debug>pwrpwr@ ---------------------------- Power Voltage : 49823 mV B+B-.Volt : 49771 mV Current : -814 mA Temperature : 23500 mC Coulomb : 85 % Total Coulomb : 74000 mAH Max Voltage : 57600 mV Charge Times : 0 Basic Status : Dischg Discharge Sec. : 0 s Volt Status : Normal Current Status : Normal Tmpr. Status : Normal Coul. Status : Normal Soh. Status : Normal Heater Status : OFF Protect ENA : BOV BHV BLV BUV POV PHV PLV PUV CBOT CBHT CBLT CBUT DBOT DBHT DBLT DBUT POT PHT PLT PUT COC COC2 COCA DOCA DOC DOC2 SC Bat Volt Status : 0x4 BVNOR Bat Tmpr Status : 0x8 BTNOR Pwr Volt Status : 0x4 PVNOR Pwr Tmpr Status : 0x8 PTNOR Pwr Curr Status : 0x20 CNOR Pwr Base Status : 0x8 DSG Pwr Coul Status : 0x2 COULNOR Mos Tmpr Status : 0x1 MOSNOR Env Tmpr Status : 0x4 ENVNOR System Fault : 0x0 Cascade Status : 0x1 CascadeNOR ----------------------------Command completed successfully$$pylon_debug>batbat@Battery Volt Curr Tempr Base State Volt. State Curr. State DTemp. State CTemp. State SOC Coulomb BAL 0 3322 -1075 21300 Dischg Normal Normal Normal Normal 85% 63300 mAH N 1 3322 -1075 21300 Dischg Normal Normal Normal Normal 85% 63300 mAH N 2 3322 -1075 21300 Dischg Normal Normal Normal Normal 85% 63300 mAH N 3 3320 -1075 21300 Dischg Normal Normal Normal Normal 85% 63300 mAH N 4 3322 -1075 21300 Dischg Normal Normal Normal Normal 85% 63300 mAH N 5 3322 -1075 20500 Dischg Normal Normal Normal Normal 85% 63300 mAH N 6 3321 -1075 20500 Dischg Normal Normal Normal Normal 85% 63300 mAH N 7 3320 -1075 20500 Dischg Normal Normal Normal Normal 85% 63300 mAH N 8 3321 -1075 20500 Dischg Normal Normal Normal Normal 85% 63300 mAH N 9 3321 -1095 20500 Dischg Normal Normal Normal Normal 85% 63300 mAH N 10 3321 -1095 20800 Dischg Normal Normal Normal Normal 85% 63300 mAH N 11 3322 -1095 20800 Dischg Normal Normal Normal Normal 85% 63300 mAH N 12 3320 -1095 20800 Dischg Normal Normal Normal Normal 85% 63300 mAH N 13 3321 -1095 20800 Dischg Normal Normal Normal Normal 85% 63300 mAH N 14 3321 -1095 20800 Dischg Normal Normal Normal Normal 85% 63300 mAH N Command completed successfully$$pylon_debug>sohsoh@Unknown command$$pylon_debug>socdsocd@Unknown command$$pylon_debug>getpwrgetpwr@getpwr$$If anyone has more info on this US3000D module, latest firmware and the latest compatible BatteryView, please share. It will be highly appreciated by the community here.
July 23Jul 23 I have the same problem. I haven’t put it in as master because I don’t trust its bms with scanning not working.I found that I can scan its details as a slave through the batteryview power info window as long as I select united and scan all 16 modules. The others are 3000C modules.I have batteryview v 3.0.40 from pylontech but it does not solve this problem.Pylontech support is looking into it for me.
Tuesday at 12:355 days The datasheet for the US3000D states that it has a height of 161mm vs the 132mm of the US3000C. Is this a typo, or is the US3000D indeed larger?I have a US3000C that has cell balancing issues, so it might have to go back and I assume I will also then get a US3000D.
Tuesday at 12:515 days Author 15 minutes ago, PierreJ said:The datasheet for the US3000D states that it has a height of 161mm vs the 132mm of the US3000C. Is this a typo, or is the US3000D indeed larger?I have a US3000C that has cell balancing issues, so it might have to go back and I assume I will also then get a US3000D.Definitely a typo, same size as a US3000C
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.